Eachine Aurora 90mm Bind-To-Fly Mini FPV Racing Drone (Spektrum DSM2/DSMX)

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Low Price: $175.99
Discontinued Online

The Eachine Aurora 90mm Bind-To-Fly Mini FPV Racing Drone is an awesome option for FPV pilots that want to whoop it up with a slightly bigger brushless powered machine. 


  • Extremely light and more powerful
  • STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
  • Adjustable Angle of camera
  • Jaw-dropping flight performance
  • Cleanflight/Betaflight support
  • Acro mode / Air mode /Angle mode support
  • Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
  • OSD Configuration has been include in BETAFLIGHT GUI
  • Radio Stick to control PID Tunes
  • BLHELI_S pass-through ready
  • Telemetry RSSI Output ready

Class: 90mm
Size: 118mm x 118mm x 70mm
Weight: 73g (battery not included)
Motor: Eachine 1104 7500KV brushless motor
ESC: 10A BLHELI_S 4 in 1 ESC Dshot600
Propeller: 50mm 4-blades propeller
Receiver: Spektrum DSM2/DSMX compatible
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL video transmitter
Flight Controller: Minicube Betaflight F3 6DOF w/built-in OSD
OSD: Betaflight OSD
Firmware: Betaflight 3.1
Flight time: 3-4minutes
Battery: 7.4V 450mah 80C lipo battery
Charger: B3PRO 2S balance charger
Minicube F3 6DOF flight controller:
Size: 27mm x 27mm x 5mm
Mount hole: 20mm x 20mm
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Artificial Horizon, Fly mode, Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
27mm x 27mm x 5mm
Mount hole: 20mm x 20mm
Firmware version: BLHELI_S 16.5
Chip: BB2, 48MHZ Chip
Lipo Battery: 2-3S
Con. Current: 10A
Peak Current: 15A (10 seconds)
BEC: 5V @0.1A
Dshot600 ready: Yes (Default)
Protocols Supported: oneshot42 oneshot125 Multishot Dshot
Damped light: On

  • 1. BNF receiver (intergrated buzzer) option:
    • Compatible Frsky SBUS receiver
    • Compatible Flysky 8CH AFHDS2A receiver
    • Compatible Specktrum DSM2/DSMX receiver
  • 2. Compatible:
    • 1). Frsky Receiver compatible with FRSKY ACCST, X9D(Plus)DJT/DFT/DHT
    • 2). Flysky Receiver compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F.
    • 3). DSM2/DSMX Receiver compatible wiht Satellite receiver.
  • 3. Prevent interference
    • Please keep the receiver antenna away from VTX antenna to prevent interference.


  • (1) Eachine Aurora 90 Frame kit
  • (1) Betaflight F3 6DOF flight controller build-in OSD
  • (1) Frsky/DSMX/Flysky AFHDS2A (optional)
  • (4) Eachine 1104 7500KV brushless motor
  • (1) Minicube 10A BLHELI_S 16.5 2-3S 4 in 1 ESC Dshot600
  • (4) 50mm 4-blades propeller CW
  • (4) 50mm 4-blades propeller CCW
  • (1) 600TVL HD CMOS 1/4 inch  camera
  • (1) 5.8g 25MW 48CH NTSC/PAL VTX
  • (1) 7.4V 450mah 80C lipo battery
  • (1) B3PRO 2S balance charger

This product was added to our catalog on April 6, 2017

Jason B
Verified Owner
Friday, Apr 14 2017 (about a year ago)
Eachine Aurora 90mm Bind-To-Fly Mini FPV Racing Drone (Spektrum DSM2/DSMX)
Cool little quad but has some flaws. It is not possible to connect a cable to the micro USB port without pulling off the prop guards and camera mount (I tried several cables, straight and right-angle connectors). This is irritating, but OK once I get it all setup I don't need to reconnect it very often so I can look past it. But then we get to the next issue: instead of using threadlock everything is assembled with CA glue. Several alloy parts on mine had the distinct white cloudy residue that CA creates when curing. I stripped out half of the screws trying to get the thing apart just so I could program and bind it. Luckily I have a bunch of spare M2 hardware, but for those who don't it will be extremely frustrating. The camera is attached to the mount with a piece of double-side tape, and mine had already fallen off when I received it. It definitely needs to be secured with zip-tie or rubberband in addition to the tape.

Once you get past the initial headaches it's actually a nice flyer. Everything was programmed to work out of the box and I just made a few tweaks for how I like to control flight modes, arming, etc. Mine is flying very well with stock tuning and doesn't have any bad characteristics. Of course with Betaflight you can tune it to be as mellow or aggressive as you like. I have crashed mine into the grass a few times and nothing broken. The quality of the video isn't spectacular, but about on par with other micro all-in-one FPV systems I've used. I didn't have any problems with excess interference or poor range (compared to other 25mW systems).

Overall this quad has a good feature set and flies well, but falls short in design and execution.
Patrick Franco
Verified Owner
Saturday, Apr 15 2017 (about a year ago)
Eachine Aurora 90mm Bind-To-Fly Mini FPV Racing Drone (Spektrum DSM2/DSMX)
Received a defective product, the fpv camera displays a blank screen.