DragRace Concepts Traxxas Slash Anti Roll Bar Kit w/Drag Pak Arms (Black)
DRC-392
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
The DragRace Concepts Traxxas Slash Anti Roll Bar Kit is a complete system that ties the rear suspension together, allowing the suspension to work as a single unit rather than independently. This greatly increases stability and traction of the chassis under power compared to an independent suspension set up. The rear shock tower has been reconfigured to allow additional rear shock positions for more tuning options compared to the factory shock tower.
NOTE: This kit requires Bandit length CVD's and rear camber link turnbuckles. Factory Traxxas Slash CVD's can be shortened to work with this kit. Shock mounting hardware is not included.
Fits:
- DRC1 Drag Pak
- DRC1 Drag Pak Mid Motor
- Traxxas Slash
- Traxxas Bandit
Includes:
- Drag Pak Rear Shock Tower
- Drag Pak Rear Shock Tower Mount
- Anti Roll Bar Kit for Drag Pak A-Arms
- Drag Pak Rear A-Arms
- Drag Pak Rear Hinge Pin Set
This product was added to our catalog on October 29, 2021
Manny Otmane
Verified Owner
Wednesday, Nov 17 2021 (about 2 years ago)
DragRace Concepts Traxxas Slash Anti Roll Bar Kit w/Drag Pak Arms (Black)
This upgrade requires major mods to a slash for it to work.
If using stock wheels you must drill extra holes for the shock to mount or it will rub on the wheel…
Shock tower is too wide and will rub on tire at full compression, needs to be trimmed out…
Does not come with body mounts… need to cut out the old ones out of the stock tower and drill the carbon one for mounting body… anyway this requires major modifications to work on a stock drag slash…
If using GTR shocks forget about it…
If using stock wheels you must drill extra holes for the shock to mount or it will rub on the wheel…
Shock tower is too wide and will rub on tire at full compression, needs to be trimmed out…
Does not come with body mounts… need to cut out the old ones out of the stock tower and drill the carbon one for mounting body… anyway this requires major modifications to work on a stock drag slash…
If using GTR shocks forget about it…