Dinky RC Yota-SCX Body Mount Kit

Dinky RC
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Low Price: $42.99
Discontinued Online

The Dinky RC Yota-SCX Body Mount Kit is a simple to install body mount kit that will allow you to mount either the Tamiya Toyota Hilux, or RC4WD Mojave bodies on your SCX10 based rig! This 3-Piece Kit will help you sort out getting started with your build! The Rock Sliders / Cab Mounts line up with your stock skid plate bolt locations on the frame rails, and the Rear Skid / Bed Mount mounts to the rear of your chassis, using your 3mm hardware.

The added 3mm of thickness in the mounting tabs of the cab mounts will require you use longer screws to install, but the Hilux body mounting hardware should work when installed thru the furthest apart holes at the lowest portion of the cab sides. The hardware holes in the Tamiya bed are two small holes, underneath the tailgate. The included 2/56" hardware is used for this. The RC4WD Mojave body does not have these holes, and they must be drilled to use the rear facing holes of the rear skid.

The Bed to Cab connection length may need adjusted to suit, the 4 bolts that attach them to one another. Elongating the connection holes to accommodate RC4WD body is required, as they are slightly different in length at that spot.
Take care when marking and drilling the holes below the tailgate. They should be 4mm on center, from the bottom edge of that area.

Package includes 3D printed body mounts & 2/56" hardware.

This product was added to our catalog on August 15, 2017