Cobra 2204-32 Brushless Multirotor Motor (90W, 1960kV)
This is the Cobra CM-2204/32 Brushless Multirotor Motor. The CM-2204/32 is identical to the C-2204 in power and general specifications. What makes the CM-2204 different is an integrated bolt on prop adapter, and the elimination of the mounting tabs, making it better suited to a variety of multirotor applications. Plus, it includes an additional 10cm of wire with tinned leads that can be trimmed to fit your application.
Cobra Brushless Motors are built from high quality components, and offer performance and value for Sport Flyers and Competition pilots alike. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a 16x19mm M3 mount pattern for easy installation on your model.
The CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and locking prop nut provides a solid attachment so your propellers will not loosen up and slip during use.
Stator Diameter: 22.0mm (0.866 in)
Stator Thickness: 4.0mm (0.157 in)
Number of Stator Slots: 12
Number of Magnet Poles: 14
Motor Wind: 32 Turn Delta
Motor Kv Value: 1960 RPM per Volt
No Load Current (Io): 0.58 Amps @ 8 Volts
Motor Resistance (Rm) per Phase: 0.153 Ohms
Motor Resistance (Rm) Phase to Phase: 0.102 Ohms
Maximum Continuous Current: 13 Amps
Max Continuous Power (2-cell Li-Po): 90 Watts
Max Continuous Power (3-cell Li-Po): 130 Watts
Motor Weight: 24.6 grams (0.87 oz.)
Outside Diameter: 27.0mm (1.063 in.)
Shaft Diameter: 3.00mm (0.118 in.)
Motor Body Length: 14.2mm (0.559 in.)
Overall Shaft Length: 32.5mm (1.146 in.)
Motor Timing: 5-10 degrees
PWM Frequency: 8 KHz
- (4) M3x5mm Motor Mount Screws
- (4) M3 Flat Washers
- Machined Aluminum Prop Washer
- Locking Prop Nut with Nylon Insert
This product was added to our catalog on May 27, 2015.