Cobra 1806-26 Brushless Multirotor Motor (2800Kv)
The Cobra CM-1806-26 (2800kv) motor is designed to be the more versatile motor in the Cobra 1806 lineup of motors. With the ability to run 3s and 4s LiPo, your prop selection is as versatile as one would expect. When running 4s LiPo, it is recommended to stick with an aggressive pitch 4" prop.
The Cobra CM-1806 series motors have a internal 2.0mm motor shaft, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 1806 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 12x16mm pattern on the back plate for easy installation on your model.
Cobra Brushless Multirotor Motors offer performance and value for your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
Cobra CM-1806/26 Motor Specifications:
Stator Diameter: 18.0 mm
Stator Thickness: 6.0 mm
Stator Slots: 12
Pole Count: 14
Motor Wind: 26 Turn Delta
Motor Kv Value: 2800 RPM per Volt
Motor Weight: 21 grams (0.74 oz.)
Outside Diameter: 23.0 mm (0.9 in.)
Motor Shaft Diameter: 2.0 mm (0.079 in.)
Prop Shaft Diameter: 5.00 mm (0.197 in.)
Motor Body Length: 15mm (0.59 in.)
Overall Shaft Length: 33.1mm (1.303 in.)
Motor Timing: 5-10 degrees
PWM Frequency: 8 KHz
- (4) M3x5mm Motor Mount Screws
- (4) M3 Flat Washers
- Machined Aluminum Prop Washer
- Locking Prop Nut with Nylon Insert
This product was added to our catalog on April 28, 2016.