Blade 600 X Pro Series Flybarless Helicopter Kit w/80HV, Motor, BEC & CF Blades

This is the Blade 600 X Pro Series Flybarless Helicopter Kit. This kit includes a set of Revolution® Flybarless 600mm carbon fiber main blades, as well as a Revolution 95mm carbon fiber tail blade set, an E-flite® heli 700, 500Kv brushless outrunner motor and Phoenix Edge 80HV, 50V 80-Amp ESC, combined with an E-flite 10A BEC.

If the bird you're flying is keeping you from realizing your full potential as a 3D master, get behind the sticks of a Blade 600 X and shatter those limitations with explosive power and performance. It shares the same frame and rotor head with the Blade 550 X, but adds the extra punch of an E-flite Heli 700, 500kV brushless motor. This abundance of power, along with an included set of Revolution 600mm carbon fiber blades will allow you to confidently explore the extremes of 3D flight with performance to spare.

• Direct-to-swash, flybarless head design
• Symmetrical carbon fiber main frames
• CNC-machined aluminum head block and blade grips
• CNC-machined aluminum swashplate
• Revolution® 600mm carbon fiber main blades
• Revolution 95mm tail blades
• Triple ball bearing-supported, 10mm solid steel main shaft
• Integrated bearing block servo mount design
• Torque-tube driven tail with aluminum tail boom and case
• Dual-point tail pitch slider and balanced tail grips
• Phoenix Edge 80HV, 50V 80-Amp ESC included
• E-flite® Heli 700, 500Kv brushless outrunner motor

Specifications:
Type: 600-class collective-pitch electric flybarless helicopter
Main Rotor Diameter: 52.8 in (1342mm)
Tail Rotor Diameter: 10.0 in (254mm)
Gross Weight: 8.35-8.80 lb (3.8-4.0 kg)
Length: 46.1 in (1170mm)
Main Gear Ratio: 8.88:1
Motor Size: Helicopter 700-class, 500 Kv brushless outrunner
Kit/ARF/RTF: Kit
Control System: 120-degree CCPM
Rotor Blade Length: 600mm
Minimum Age Recommendation: 14 years
Experience Level: Professional
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
Is Assembly Required: Yes

Includes:

• (1) Revolution® Flybarless 600mm carbon fiber main blade set
• (1) Revolution 95mm carbon fiber tail blade set
• (1) E-flite® heli 700, 500Kv brushless outrunner motor
• (1) Phoenix Edge 80HV, 50V 80-Amp ESC
• (1) E-flite 10A BEC
• (1) Sleek pre-painted fiberglass canopy

Needed To Complete:

• 6+ channel transmitter and receiver radio system
• Cyclic servos (3)
• Tail servo (1)
• Batteries (2 x 22.2V 6S 3200–4400mAh LiPo)
• Charger
• Flybarless control system
• Tools for assembly

This product was added to our catalog on October 25, 2013