Axial Transmission 2-Speed Hi/Lo Component Kit
AXI31181
Back Order Now
FREE Shipping Eligible!
Learn More
Note: Manufacturer does not allow coupons
This item earns up to 110 VIP Reward Points
Learn More
Axial's Yeti Transmission 2-Speed Hi/Lo Component Kit includes a full set (3) of heat treated hardened steel machined gears, plus an additional optional high speed gear (Hi Gear Option), full set of cartridge bearings, two different servo mounting options (micro or standard), servo saver system and all necessary hardware to complete the installation.
When you examine the gear ratios, first gear ends up a being a 2:1 reduction intended for slow technical crawls while the Hi Gear (28T) gear is based off the stock 1.08:1 ratio and Hi Gear Option (26T) increases top speed with a 0.93:1 ratio. Shifting through gears can be done on the fly using a 3rd channel switch on your transmitter.
Heat Treated Hardened Steel Machined Gears
The goal was to produce a gear set strong enough to take on anything thrown at it. This required a steel gear set that has been hardened, heat-treated and machined to tight tolerances for optimum performance. The 2-speed gear slider features the same treatment as the gears along with having four-tooth engagement design for accurate and rapid gears shifts on the fly.
Full Set of Cartridge Bearings
Kit includes a full set of cartridge bearings (6), which is great because while you’ve got the transmission apart it makes for a great rebuild opportunity.
Servo Options
Actuating the gear shifting can be done with either micro or standard sized servos thanks to multiple mounts offered in the kit. Axial recommends a servo with at least 80oz/in of torque to properly complete the shift. The kit features a servo saver design for increased servo longevity and two different servo horns (one long, one short) depending on servo used along with three inserts (23T, 24T, 25T) to accommodate various servo spline counts.
Hardware
Within the package all necessary hardware needed to complete the installation of the 2-Speed conversion into your YETI ™ transmission is supplied, including the servo mounting screws.
Features:
When you examine the gear ratios, first gear ends up a being a 2:1 reduction intended for slow technical crawls while the Hi Gear (28T) gear is based off the stock 1.08:1 ratio and Hi Gear Option (26T) increases top speed with a 0.93:1 ratio. Shifting through gears can be done on the fly using a 3rd channel switch on your transmitter.
Heat Treated Hardened Steel Machined Gears
The goal was to produce a gear set strong enough to take on anything thrown at it. This required a steel gear set that has been hardened, heat-treated and machined to tight tolerances for optimum performance. The 2-speed gear slider features the same treatment as the gears along with having four-tooth engagement design for accurate and rapid gears shifts on the fly.
Full Set of Cartridge Bearings
Kit includes a full set of cartridge bearings (6), which is great because while you’ve got the transmission apart it makes for a great rebuild opportunity.
Servo Options
Actuating the gear shifting can be done with either micro or standard sized servos thanks to multiple mounts offered in the kit. Axial recommends a servo with at least 80oz/in of torque to properly complete the shift. The kit features a servo saver design for increased servo longevity and two different servo horns (one long, one short) depending on servo used along with three inserts (23T, 24T, 25T) to accommodate various servo spline counts.
Hardware
Within the package all necessary hardware needed to complete the installation of the 2-Speed conversion into your YETI ™ transmission is supplied, including the servo mounting screws.
Features:
- Heat treated, hardened, and machine cut gears (18T, 28T, 26T, 36T, slider)
- Full set of transmission cartridge bearings (AXA1221 and AXA1218)
- All necessary hardware (AXA146, AXA0145, AXA116, AXA0147, AXA0109, AX31073)
- Servo saver system, w/ two servo horns, three spline adapters (AX31009)
- Servo mounting brackets (micro and standard)
- Lo Gear ratio: 2:1
- Hi Gear ratio: 1.08:1
- Hi Gear Option ratio: 0.93:1
NOTE: Please download and study the instruction manual from the resources tab at the top of the page for more information.
Needed to Complete:
- 3 channel transmitter for shifting
- Micro or Standard size servo with at least 80oz/in of torque
- Axial Yeti
This product was added to our catalog on November 4, 2015