Axial "NVS" Night Vision System
AXI24251
Back Order Now
FREE Shipping Eligible!
Learn More
Note: Manufacturer does not allow coupons
This item earns up to 121 VIP Reward Points
Learn More
This is the Axial "NVS" Night Vision System. For the ultimate level in scale detail, you can now add the NVS light system to your rig! This system features controls for headlights, tail lights, brake lights, and right/left turn signals, as well as extra auxiliary lighting. This optional lighting kit is ideal for Rock Crawlers, Short Course Trucks, or any other application that could benefit from a multi-light system.
Features:
- When going forward the headlights brighten, when the brakes are applied the brake lights will brighten
- Turn left or right and the blinkers will signal your turn.
- The main control box is a nice compact size measuring 47x32x23mm ~ 1.8x 1.25x0.9” (Width x Depth x Height).
- External on/off switch so you can mount it remotely to make it easier to reach.
- Separate on/off switch for auxiliary lighting mounted on main control box.
- Separate light connectors for up to 10 LED light strings.
- Additional/replacement LED light strings are available.
Includes the following LED light strings:
- (1) Double LED light string for headlights (White LED).
- (1) Double LED light string for brake lights (Red LED).
- (2) Double LED light strings for turn signals (Orange LED).
- (1) 5 LED light string for auxiliary lights (White LED).
This product was added to our catalog on December 22, 2009
Anonymous
Verified Owner
Thursday, May 22 2014 (about 9 years ago)
Axial "NVS" Night Vision System
No wiring instructions for use with external BEC. System must be initiated every time you turn it on (Turn R, Turn L, Go Forward, Go Reverse) then you may have to access control board to set switches for directional lights, this includes using incorporated on/ off switch. Compatibility issue with some radios!!! Does not work with Spektrum DX3C w/ SR301 and others. I found this out after many, many hours of trying to get this system to initiate, finally trying different TX/ RX systems until finally it initiated. I have found this referenced on many forums. One user mentions that it was acknowledged by Axial and person received alternate goods in exchange after contacting Axial. I sent email to Axial (Hobbico) several days ago no reply from them. If you try to use this with Spektrum system you will have to trim RX connectors and if using battery connectors other than Tamiya, then you will need to modify power supply, so.... that's right you won't be returning it after that. My options shelve $100 NVS system or change radio.
Anonymous
Verified Owner
Thursday, Jun 5 2014 (about 9 years ago)
Axial "NVS" Night Vision System
Had no problems. Mine came with instructions and works with my DX3C and receiver perfectly.
Scott Loynd
Thursday, Dec 22 2016 (about 7 years ago)
Axial "NVS" Night Vision System
I mounted this in my Axial Yeti XL with a 4210 Spektrum receiver. As soon as I powered it up, the black lead on the throttle going to my ESC smoked and the light unit didn't function. The power connection was tied to a 2s battery and I verified that the polarity was correct and that the battery voltage was 8.2 volts. I checked my ESC voltage and it is 6 volts, correct polarity.
I came very close to damaging a very expensive ESC and had to replace the ground wire. I would not risk destroying your ESC with this NVS light system. I plan on hard wiring the LEDs through an independant external ESC and run the lights either off or on by switch.
I came very close to damaging a very expensive ESC and had to replace the ground wire. I would not risk destroying your ESC with this NVS light system. I plan on hard wiring the LEDs through an independant external ESC and run the lights either off or on by switch.
