Arrma Outcast 6S BLX Brushless RTR Monster Stunt Truck (Orange) w/TTX300 2.4GHz Radio System

Price: $499.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Note: Manufacturer does not allow coupons

The Arrma Outcast 6S BLX is a battle hardened monster that goes where it wants. Designed to break the mold, Outcast 6S is a dedicated action machine with performance that could make you an RC truck stunt hero! Outcast 6S is primed for multi-surface driving action, no matter how hard the elements fight back. Complete with super-strong steel, lightweight aluminum and rugged composite materials; when you are behind the wheel of the Outcast 6S, you are in charge of a powerful force.

The Outcast 6S body shell features a future styled retro truck body shell with aggressive bolt-on style over-fenders and a roll cage fitted with sacrificial screws that protect the roof from wear when sliding upside-down at 60mph. Outcast 6S boasts a strong composite center body support for added protection when the action gets upside-down. High-wall composite dirt guards at the front of the chassis protect the electronics and the center transmission.

 

Defy the Laws of Physics
Designed to STUNT, the short wheelbase of the Outcast 6S allows it to pull wheelies, flips and tricks with ease. Anything is possible for Outcast 6S. A wheelie bar is integrated into the wing mount. It allows long, high angled wheelies, while the rear wing aids high speed stability and adds to the super-cool looks.

6S Power
The battery tray in the Outcast 6S model holds your batteries in TIGHT. Two hook-and-loop straps, fitted perpendicular to each other, provide a secure fit for your batteries. Secure fitting means batteries can be safely mounted side-by-side or one on top of the other. Plus, the battery tray incorporates a balance plug stowage area. Battery balance plugs are held in place with a rubber strap, keeping them away from rotating parts. Wire routing clips fit to the long hook-and-loop strap and keep battery to ESC wires away from rotating parts of the model. The front upper brace of the battery adjusts itself to the height of your battery packs.

Arrma TOUGH
Soaking up a wide range of surfaces is made easy with the included red anodized adjustable shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control. Strong anodized aluminum parts used where it matters, providing strong, reliable performance. A wide heavy duty front bumper provides protection.

The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready. Fitted with super-reliable XT90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management. The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience. Recommended battery specification: 5000mAh - 35C minimum - per battery pack

The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with the BLX185 ESC unit. A beautifully etched black aluminum motor can provides a premium look, while a four-pole internal configuration keeps the power supply smooth and consistent. Gold bullet connectors provide fast and easy wire removal when you need to clean your vehicle. The aluminum motor can provides increased heat dissipation from the finned body section. A dual motor shaft flat section provides a safe and secure pinion gear fitting.

Specifications:
Scale:
1/8
Max Speed (mph): 60+mph / 96+km/h
Power Type: Brushless
RTR: Yes
Length: 540mm / 21.26"
Wheelbase: 328mm / 12.91"
Ride Height: 47mm / 1.85"
Front Width: 461mm / 18.15"
Rear Width: 461mm / 18.15"
Height: 230mm / 9.06"
Locking Diffs: No
Weight (NO BATTERY): 4.86kg / 10lbs 11oz
Max Battery Dimensions: 158x48x70mm / 6.22x1.89x2.76"
Warranty: 2 Year Limited Manufacturer

Needed to Complete:

  • 2~2S, 1~4S, 2~3S or 1~6S Lipo 35C 5000mAh minimum (Hard or soft-case - within 158x48x70mm dimensions)
  • Compatible LiPo Charger
  • (4) AA Batteries for Transmitter

This product was added to our catalog on July 31, 2017