Align T-Rex 450PRO DFC Combo Helicopter Kit w/Motor/ESC/Servos & Carbon Blades
AGNKX015090
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Align T-REX 450PRO DFC Combo Helicopter Kit. This kit includes one Align 450MX 3400kV motor, a RCE-BL35P Brushless ESC, three Align DS415M digital servos, one DS520 digital servo and 325D 3D Carbon Fiber rotor blades.
T-REX 450PRO DFC Features:
- Equipped with the DFC flybarless head assembly - featuring an extremely low CG design to minimize wind resistance; providing even more direct and precise flight control response and higher top speeds
- Removable main shaft block and servo mounting block to simplify main shaft and servo maintenance
- Integrated battery and ESC mounting platform, with adjusted battery position to achieve the optimal CG position of the helicopter
- Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights
- Improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics
- Redesigned style gyro mounting platform with added length
- Highly rigid and lightweight carbon side plates
- Redesigned style dual point supported tail control assembly for a slop free tail, improving on rudder resolution and control precision
- Unique anti-centripetal force weight tail blade grips to improve rudder locking effect
- Equipped with Aligns MX series high efficiency brushless motor
- Highly efficient torque tube tail drive design which dramatically reduces power loss found on belt driven system
- Streamlined canopy design
T-Rex 450PRO DFC Specifications:
Length: 640mm
Height: 204mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 12T
Main Drive Gear: 121T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:10.08:4.24
Weight (w/no power system): 513g
Flying Weight: Approx. 638g
T-Rex 450PRO DFC Combo Includes:
- (1) T-REX 450PRO DFC Kit
- (1) 325D 3G Carbon blade set
- (1) RCE-BL35P 35A Brushless ESC
- (1) 450MX Brushless motor(3400KV)
- (3) DS415M (Metal Gear) Digital servo
- (1) DS520 Digital servo
Needed to Complete:
- Transmitter (6-channel or more, helicopter system)
- Receiver (6-channel or more)
- 3GX Flybarless System
- (1) Pitch gauge
- (1) 11.1V 3S Li-Po 2000~2300mAh battery
This product was added to our catalog on August 22, 2012
Anonymous
Wednesday, Nov 21 2012 (about 11 years ago)
Align T-Rex 450PRO DFC Combo Helicopter Kit w/Motor/ESC/Servos & Carbon Blades
I bought this along with Align's 450 PLUS DFC. I have tried the clone versions of Align's Trex 450 and have been disappointed with parts that are not balanced, holes that don't align (no pun intended ), and metal working errors such as parts that simply do not fit together. In my experience, I find it better to pay a little more for Align parts and be able to better trust the quality of the components. This PRO DFC is their flagship 450 and it shows. The thing is built like a BMW and with patience and care, will go together very easily. I, along with some others got caught up on wiring the 3GX. Remember this- though you may use a 6 channel receiver- IT MUST HAVE A 7th SLOT FOR BATTERY. The six channels will go to the obvious places but that 7th slot must be open for the battery lead to power the 3GX. I bought Futaba's R2106GF thinking it would be a nice small receiver but it only has 6 slots and the sixth one is the battery. (No room for pitch channel) Also the 3GX must be wired up correctly to even turn on. You may think you got a dud and get frustrated. Believe me, mine drove me crazy for a day or so. Take your time, read the manual, and watch youtube videos. Once you get it all working, it's worth it. This thing is the best 450 Helicopter by far and away in my opinion. I suppose for smack 3D you may want a stronger motor but before that, I suggest you try a good ThunderPower 65C battery or something similar. The Align motor is quite good. I love how solid this thing is built, it looks amazing, and there are some cool CNC upgrades to make it even better. I would suggest a beginner go for a flybarred version as the DFC is super agile and responsive and can be touchy to fly if you are overcorrecting. It requires a lot of very small inputs at hover and forward flight. When flipping, rolling and looping- all that agility will bring the biggest smile to your face. Enjoy :-)