Align MR25 FPV Racing Drone V2 w/ESCs, Motors, 2K Camera & MRS Controller

Read Reviews
Write a Review
Align MR25 FPV Racing Drone V2
Price: $399.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

Meet the MR25 FPV Racing Quad V2; the next progression of Aligns FPV race offerings. The V2 contains all the greatness of the original, but adds a 2K DV camera, a 40-channel 600mW/25mW 5.8GHz video transmitter, an MR25 protective servo arm and a MR25 lower canopy.

The Align MR25 FPV Racing Drone is an out of the box race machine. With powerful 2300kv motors and adjustable motor mount angles of +/-30°, you have an advantage over your competition. The 7-in-1 Flight Control system combines the ESCs, power distribution, OSD, Bluetooth connectivity and gimbal control with a 32 bit high speed processor to provide stable and reliable performance in an all in one electronics system. Another unique feature is the gimbal controlled tilting camera that provides instant tilting compensation during high speed flights so you always get the best image through your goggles.

The frame features a unique flat arm design, and an incredible LED light system that offers 256 LED color options that can be changed easily through the MRS app. Want to do more than just fly around? This nimble and lightweight aircraft is also capable of 3D flips and rolls by simply moving the aileron or elevator stick to the end of its travel. Align is coming out with guns blazing, in an effort to deliver the highest quality product possible. This is the FPV racing drone you have been waiting for!

2K DV Camera
Offering 2K 1440P 30FPS video at nearly 0 latency is an immense improvement for FPV flight allowing pilots to navigate tight and treacherous obstacles with an improved image quality to ensure small objects like twigs, leaves, bushes, and various items don't reach out and grab you from the sky at the last minute. 

 

NOTE: The model shown may not be an accurate representation of the color you will receive. Colors are selected randomly. The Align MR25 V2 model AGNRM42507XET is available in four different colors: red, yellow, white, or green. If you would like a specific color, please contact our customer service department prior to placing your order and we will do our best to honor your request. 

Features:

  • Cutting Edge Flight System: MRS flight controller utilizes a 32 bit high speed processor that combines the ESC, power distribution, OSD, Bluetooth connectivity and gimbal control function. The high precision 6 axis gyro sensor and barometric sensor has been carried over from Align's autopilot technology for stable and reliable performance.
  • Parameter Adjustment Through App: Setup and Flight parameter tuning is done through the MRS app and is compatible with iOS and Android smart phones and tablets.
  • Bluetooth Functionality: Bluetooth 4.0 compatibility featuring low power, high speed transmission.
  • Customized LED Lights: High intensity LED's are mounted on the bottom, motor mounts and back plate, with 256 colors to choose from. Customize the LED colors using the MRS app.
  • DV Camera Gimbal: Single axis camera gimbal for camera tilt angle compensation during high speed flight. This keeps the camera image level with the horizon. The tilt angle is also manually adjustable.
  • Camera Multi-function Settings: Camera parameters are adjustable through the MRS app. Image size, shutter speed, aperture, ISO, white balance and more.
  • FHD DV Video Recorder: 1440P 30FPS / 1080P 30FPS / 720P 60FPS video with a 90° FOV; less than 5% image distortion; supports micro SD cards up to 32GB.
  • Remote Photo/Video Control: Camera shutter and video start/stop function can be controlled through the RC Transmitter.
  • OSD Live Flight Data: Live flight data display including flight time, mode, attitude, voltage, capacity, current, altitude, vertical velocity, camera mode, low voltage warning and more are visible on the flight screen.
  • FPV: Onboard camera and 5.8GHz transmitter allow you to broadcast live video with zero latency directly to your LCD screen or FPV goggles.
  • Impact Resistant Aerodynamic Shell: Made from lightweight ABS plastic. Improves visibility and increases protection. Screwless quick latch mounting design makes installation quick and easy, and allows fast battery changes. Multiple colors available for a custom look.
  • High Torque, High Speed, Efficient Motors: Alight BL1806-2300kv multirotor race motors are based on Align's motor technology. Normal flight time approximately 9 minutes with 3S-1300mAh battery.
  • Adjustable Motor Tilt Angle: Adjustable motor angle +/- 30° improves speed and stability. This gives racers a performance edge at the starting line, and offers flexibility to compensate for the camera angle. 
  • Intelligent Power Management System: Manages signal and power distribution. With single battery, power is distributed to the flight control, motors, DVR, video downlink, gimbal, and multifunction panel. Master power switch makes powering up simple, and a battery meter displays the current battery capacity. The multifunction panel has unique brake and turn signals for added safety and realism during FPV racing.
  • Stunt Mode: Capable of 3D flips in manual mode by moving the aileron/elevator stick to the end of its travel.

Specification:

  • Air Frame:
    • Diameter: 250mm
    • Height (Excluding Antenna): 78mm
    • Propeller Diameter: 5 inches (127mm)/ 6 inches(152mm)
    • AUW (Excludes Battery): Approx.410g
  • MRS Flight Control:
    • Input Voltage: 10V~16.8V
    • Operating Frequency: 800HZ
    • Operating Temperature: -20°C~65°C (-4°F~149°F)
    • Maximum Angular Speed: Aileron/Elevator 400°/sec, Rudder 45°/sec
    • Maximum Tilting Angle: 80 degrees
    • Supports Multicopter Configurations: MR25, MR25P
  • Multicopter Brushless ESC:
    • Input Voltage: 11.1V~14.8V (3S~4S Li-Po)
    • Max Continuous Current: 15A
    • Operating Temperature: -5°C~45°C (23°F~113°F)
  • RCM-BL1806 Brushless Motor 2300KV (RPM/V):
    • Input Voltage: 11.1V
    • Max Continuous Current (3 min): 12A
    • Max Continuous Power (3 min): 135W
    • Stator Arms: 12
    • Magnet Poles: 14
    • Dimesion/Weight: Φ5xΦ23x25.6mm/18.5g
  • 5.8GHz Video Transmitter:
    • Operating Frequency: 5.8GHz
    • Transmitting Channels: 40 CH
    • Input Voltage: 7~19V DC
    • Operating Current: 300mA 12V
    • Antenna Interface: RP SMA
    • Transmitting Power: 600mW
    • Dimension: 31x23x11mm
    • Weight: 14g (Exclude Antenna)/21.48g (Include Antenna)
  • Video Camera:
    • Recording: 1440P 30FPS / 1080P 30FPS / 720P 60FPS
    • Encoding Format: MOV
    • Photo Resolution: 4352/3264 pixels
    • Shutter speed: 2~1/8000sec
    • Aperture: F2.1
    • Input Voltage: 5V
    • FOV (Field of View): 90°
    • Memory Cards: Micro SD (Maximum Supported 32GB)
    • Interface: Mini USB, AV OUT/DC In, MRS Controller
    • Video Output Format: PAL、NTSC, selectable
Includes:
  • (1) MR25 Racing Quad
  • (1) MRS Flight Control System
  • (4) Brushless Motor BL1806 (2300KV)
  • (1) 5.8GHz Video Transmitter
  • (1) MR25 DV Video Recorder
  • (1) DV Camera Gimbal
  • (4) 5045 Propeller
  • (4) 6040 Propeller
  • (1) Circular Ploarized Antenna TX
  • (1) MR25 Sticker
  • (1) S.BUS Connector
  • (2) Receiver Signal Wire
  • (1) Satellite Adapter
  • (3) Hook and Loop Tape
  • (1) Double Sided Tape
  • (1) Hook and Loop Tape
  • (2) Dual Lock Fastener
  • (2) Hex Head Wrench
Needed to Complete:
  • R/C Transmitter (6-channel or more, aircraft / multicopter system)
  • Receiver (6 channel or more) or Satellite Receiver
  • 1300~1800mAh 3S LiPo Battery & Charger
  • FPV Goggle or FPV Monitor with 5.8G video receiver
  • Smartphone with MRS app for tuning

This product was added to our catalog on September 28, 2016

Luis O Lopez Arroyo
Verified Owner
Sunday, Nov 6 2016 (about 7 years ago)
Align MR25 FPV Racing Drone V2
This is and amazing piece of technology. This is my second quad, and so far it is great. I set it up with my Orangerx radio bound to a Spektrum multi rotor satellite receiver. First try and it was working. The use of a propietary program to set it up may sound like not a very good idea, but it works perfectly. No need for cables or special connections. Just use your blutooth signal and you're done. As far as performance, the 1806 motors are more than adequate, but as soon as you upgrade to the 2205's, it really wakes up. I'm using 5045 2 blade props on 3S Tattu 45c batteries. It's quite peppy and very reponsive. Plus I get improved run time. My only gripe is that the motor mounts are sized for Align motors only. At least for the 2205's. Bolt spacing is 17mm, where other motors use 16/19mm. Not a real problem as long as the spare motors remain in stock with vendors. Other than that, it's a great quad for intermediate to advanced users. With the 2205 motors and 4s battery, it gets very aggressive and fast. And it starts to sound a bit scary. As long as you follow instructions and not exceed the prop/battery recomendations, you'll have no problems. In conclusion, very happy with my MR25 v2 and with the overall service from Amainhobbies!