Align APS Lite Gyro

This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Low Price: $493.99
Discontinued Online
This is the Align APS Lite Gyro. The Align APS Lite gyro is used in conjunction with Align's 3GX flybarless system and is easily installed and setup. The APS Lite is incredibly functional with only a few setup steps and features a built in 3-axis accelerometer, a 3-axis magnetic compass, an altimeter, and a GPS sensor that work with a DSP processor, allowing the APS Lite to have precise detection and control abilities. The APS also features a failsafe function, so When the helicopter loses radio signal, the APS Lite takes over and will fly the helicopter until the helicopter regains radio signal! The system supports Spektrum/JR satellite receivers, as well as Futaba S.BUS architecture, and also supports future software upgrades. Additionally, an Automatic Helicopter Stabilize function keeps you in control when the helicopter is not stable, simply switch to APS Mode and the APS Lite will immediately stabilize helicopter, making this a must have item for beginners.


  • Use with Align's 3GX flybarless system
  • Semi-autonomous take off / Landing
  • Automatic return home
  • Emergency bailout stabilization
  • Simple logical setting through transmitter
  • Built in 3-axis accelerometer, 3-axis magnetic compass, altimeter, and GPS sensor to work with DSP processor for precise detection and control abilities
  • Automatic return home during loss of signal situation
  • Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture
  • Supports software upgrades
Suitable Voltage Range: DC 3.5~8.4V
Operating Current Consumption: <200mA @4.8V
Operating Temperature: -20℃~65℃
Operating Humidity: 0%~95%
RoHS Certified: Yes
Hovering Precision (Depending on satellite status): Horizontal 1m/Vertical 1m
APS Control unit Dimension/Weight: 35.4x27.9x17mm / 14.8g
APS Sensor Dimension/Weight: 29.5x26.3x10.8mm / 12.7g
Use With: 3GX V3.1 Programmable Flybarless System


  • (1) APS Lite Control Unit
  • (1) APS Sensor
  • (6) APS gyro anti-vibration foam (34x9x3mm)
  • (1) APS sensor mount (34.5x30x6mm)
  • (1) APS sensor mounting platform tailboom clamp (550-700)
  • (1) APS sensor mounting platform tailboom clamp (500)
  • (1) APS sensor mounting platform tailboom clamp (450)
  • (1) APS controller vibration dampening metal plate (35.4x27.9x3mm)
  • (1) Signal Y-adapter
  • (1) APS Signal wire (350mm)
  • (1) APS Signal wire (320mm)
  • (1) GPS Signal wire (160mm)
  • (2) Self tapping screw (T2x10mm)
  • (2) Self tapping screw (T2.6x10mm)
  • (2) Self tapping screw (T3x12mm)
  • (1) Gyro foam  (3M 24x24x2mm)
  • (1) Plastic flat screwdriver (3x7x40mm) 

This product was added to our catalog on May 7, 2013.