Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver

Airtronics
AIR92524
Read Reviews
5 (5)
Write a Review
Discontinued
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is the Airtronics 2.4 GHz FHSS-2 3 Channel Receiver. The RX-371 surface receiver is small, lightweight, economically priced and compatible with all Airtronics FH2 capable surface transmitters - including but not limited to: MX-Sport, MX-3FG, MX-3X, MX-V, M11 FHSS-2, and M11X.

This receiver works well in cars, trucks and boats, but is not ideal with High Voltage servo applications without a 6V BEC, as it has a nominal voltage rating of 4.8~6.0V.

Features & Specifications:

  • One-Touch Binding
  • Single Receiver Antenna
  • Compatible will All Airtronics 2.4GHz FHSS-2 Surface Transmitters
  • Frequency/Modulation Type: 2.4GHz/FHSS-2
  • Nominal Input Voltage: 4.8v ~ 6.0v
  • Weight: 0.33oz (9.5gr)
  • Dimensions: 1.03 x 1.18 x 0.62in (26.1 x 29.9 x 15.7mm)
  • Fail Safe: Yes (Throttle)
  • Connector Type: Universal 'Z'


This product was added to our catalog on August 19, 2009.

daniel howard
Verified Owner
Saturday, Nov 23 2013 (about 2 years ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
Great little receivers, I have six of these that all work perfectly with my MT-4. Good range, no brown outs even with savox servos. Remember, friends don't let friends drive spektrum.
Merdith Roach
Verified Owner
Saturday, Jun 18 2011 (about 5 years ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
I bought this receiver for my MX3 radio and it's awesome. It is really small, and has not missed a beat in my Mugen MBX-6. It gives me plenty of room for the wires that always seem tough to fit just right in the radio box. One thing is if you plan on sticking it with double sided tape you may want to tape both sides together or use a tiny drop of super glue to keep both halves together, not a big deal, but I have noticed that recievers are not as sturdy as they used to be, they come apart when prying them up to clean the car or restick them, or even come apart just from the tough world of nitro buggy racing. Not a big deal, just be careful with it... I just used one drop of super glue on each tab and it should stay in one piece.....
Cole Fiene
Monday, Apr 8 2013 (about 3 years ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
Great receiver haven't had any problems with it and I have had it for around six months but still no problems.
Eric Washburn
Monday, Aug 22 2011 (about 4 years ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
Great receiver! Very compact - it fits really nicely in my 12th scale (space is scarce on those). Great response time!! I have many wins with this reciever.
Daniel Andrew Noel
Thursday, Jul 21 2016 (3 days ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
Don't know what someone was saying about these not working with Lipos? I've been using these receivers for a few years now and I own about 6 of them. I use these in everything from Rock Crawlers to on and off road racing along with my MT4 transmitter. I've run them with 2s, 3s with no problem, in fact never had a issue with any of the RX-371 receives that I own. I think the RX-371 is the best bang for the buck.
armando sanchez
Verified Owner
Monday, Aug 3 2015 (11 months ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
Be aware that this will not work if you are running 2s lipo. It only works with 6cell nimh, otherwise it works great.
Michael Abadilla
Verified Owner
Wednesday, Aug 3 2011 (about 4 years ago)
Airtronics RX-371 2.4GHz FHSS-2 3 Channel Receiver
used this on my Losi 8e and after a couple of runs I hear some rattling inside. Turned out to be the one capacitor came loose, it was still working but I just feel like i had to replace it so I did, with another receiver. I don't think I'll try the same receiver again after that experience. I didn't use servo tape but the bottom of the receiver box was padded and everything was snug inside with the padding and wires.