Agama A319E 1/8 Electric Buggy Kit

Agama A319E 1/8 Electric Buggy Kit
Price: $599.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

The Agama 319E 1/8 Electric Buggy Kit is the culmination of years of design, development and dedication with over 50 years of racing experience and it is set to push the field of 1/8th electric racing, just like it’s nitro brother has all over the world!

When the Ebuggy was on the drawing table there were key changes made, to create a superb platform. The ease of maintenance on the Ebuggy has been hugely improved, along with making the car easier to drive at a fast pace.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model. 

Features:

  • Chassis: The buggy chassis plate features an updated shape at the front and rear. The rear has more torsional flex whilst still remaining longitudinally stiff. The front of the chassis has also been more angled to offer better clearance from the tire at full lock as well as more roll clearance in long sweeping turns. The chassis is narrower to provide a lower overall weight whilst keeping the overall width and driving characteristics associated with that. The chassis no longer has the holes in the bottom of it, because the gearboxes are now mounted higher.
  • Radio Tray: A entirely redesigned radio tray makes for better servo position, more room in the boxes for all of the electrical equipment as well as a quicker and easier removal of the radio tray and servo.
  • Split center diff mount: A split center diff mount is now used, the diff is now rotated with the spur to the back and a new brake linkage system is used for more consistent braking throughout a run. 
  • Drivetrain: The drivetrain features 39T Crown gears mated to 12T pinion gears, this makes the buggy easier to drive with more corner speed, a smoother more efficient transmission and class leading durability.
  • Lightweight one piece rear wing mount: Lightweight one piece wing mount has been utilized it offers more durability and a lower center of gravity whilst also allowing for more tuning options with a range of height adjustment where it mounts to the rear shock tower.
  • Shock towers: With the updated front and rear geometry, shock towers have been used that give the optimum shock length for all conditions and the rear tower has the various wing mount height holes.
  • Wishbones hangers: A/B/C/D blocks offer updated roll center and anti squat positions more optimized for the geometry.
  • Steering Posts: Longer steel steering posts are used, this is for compatibility with the raised front gearbox and steering assembly.
  • Steering Top Plate: Upgraded composite steering top plate as been produced in line with the steering post positions on the chassis plate as well as the raised front gearbox.
  • Chassis Braces: Chassis braces are used with a single chassis mounting point on both the front and rear, a secondary rear brace is also included in the box for a further reduction in chassis flex. 
  • Bodyshell: Updated cab forward body. Very good high speed stability.
  • Chassis side Guards: The chassis side guards have a redesigned shape and height for better protection from the elements and fit the chassis shape. They also now use a wraparound design for even better protection in all racing conditions.
  • Caster Block: Updated 17.5 degree composite caster block is included in the box
  • Steering Plates: Updated steering plates are used to change the Ackerman of the buggy, making it easier to driver and more rotation on low speed and smoother at high speed.

Needed to Complete: 

  • 2/3 channel radio/transmitter
  • Steering Servo
  • 1/8 Scale ESC and motor
  • 4S LiPo battery
  • 1/8 Buggy tires, wheels, inserts & CA glue
  • Paint for body
  • Hex tools (1.5, 2.0, 2.5mm), pliers, other tools for assembly 

This product was added to our catalog on January 22, 2021