1UP Racing TC7.2 V2 Dynamic Toe Control Conversion

This is the optional 1UP Racing V2 Dynamic Toe Control Conversion for the Team Associated TC7.2 1/10 Touring Car. The original Dynamic Toe Control conversion for the TC7.1 went on to win back-to-back ROAR National Championships in 2017 and 2018 in the hands of Rick Hohwart and Ryan Cavalieri! With that, 1UP Racing is extremely excited to bring that championship winning geometry into this design for 2019 with 3 major goals: to be stronger, lighter, and more versatile.

In-Depth Features:

• Strength: No compromises were made when it came to selecting materials for the v2 design. The knuckles, hubs, and turnbuckles are all precision machined from aircraft grade United States 7075-T6 alloy. The knuckle is suspended between 2 5x8mm ball bearings for the smoothest movement possible. The outer camber link ball stud threads directly into the hub ensuring there is no bind as the knuckle goes through it’d dynamic movement. 2.5mm thick carbon fiber arms extend forward from the knuckles. Black anodized aluminum locknuts and shims are included standard. Hardened steel is used for the inner and outer ball studs.
• Weight Reduction: DTCv2 uses 100% genuine 1up Racing parts and adds 28% less weight than the original! V2 features an ultra low CG design with the weight moved towards the center of the car.
• More Versatile: The 1UP hub offers axle height adjustment. Use the low position for increased stability on high grip tracks, or raise the knuckle for increased off-power steering on low grip tracks. The unique 2 piece hub allows the standard rear arms to retain all of their material and rigidity. This keeps the car feeling far more consistent throughout the run.
• Easy Installation: The DTCv2 hubs mount to your stock rear arms with standard hardware. Switching back and forth between the stock rear hub and the DTCv2 hub assembly is quick and easy!
• Installation Notes: The DTCv2 hubs come completely assembled by 1up Racing! Remove the bearings and hardware from your original hub and install in the DTCv2 hubs. Run the included 1mm wheelbase adjustment spacer towards the front of the car for the initial setting. The Team Associated TC7.2 chassis features 2 screw holes for the DTCv2 inner mounts. These are found to the left and right sides of the motor mount. Use the included M3x6FH screws to secure the inner mounts to the chassis. The bottom M3x2.5mm set screws have thread lock already applied. Tighten so they are snug on the hinge pin. Do not over-tighten these screws!
• Standard Settings: When switching from stock hubs to the DTCv2 hubs it is recommended to add 10g to the front plastic bumper to keep the same weight bias. Adjust to 3° static toe and add or reduce toe as needed. Dynamic toe is easily adjusted by shimming the outer ball studs. Less shims will result in more dynamic toe gain as the suspension compresses resulting in more forward traction. More shims results in less dynamic toe and provides increased mid-corner rotation and improved stability under braking. Pair your DTCv2 conversion with 1UP Racing TC7.2 +1.5• & +2• Pivot Blocks for even more tuning options! These will allow you to run a straight inner rear hinge pin without making the car too narrow.

Includes: 

• (2) 1UP150111 Aluminum Knuckles
  
• (2) 1UP150112 CF Knuckle Arms
  
• (2) 1UP150113 Aluminum Hubs
  
• (2) 1UP150114 Aluminum Lower Bearing Hubs
  
• (2) 1UP150115 Aluminum Turnbuckles
  
• (2) 1UP150116 Inner Ball Studs
  
• (2) 1UP150117 Outer Ball Studs
  
• (4) 1UP150118 5x8mm Ball Bearings
  
• 1UP150119 DTC Hardware
• 1UP200201 1up Racing Turnbuckle/Ball Cup Wrench
  

Needed To Complete:

• (4) Ball cups for installation

This product was added to our catalog on February 4, 2019