1UP Racing Heatsink Bullet Plug Grips w/5mm Bullets (Black/Red)

These are so nice. No more worry of losing wires from pulling on them to remove the bullets. Also work great on charge leads. Pick up a set you won't be dissatisfied.

Maybe these require more skill with a soldering iron than I've got to make them fit nicely. For me they were an inconsistent fit, even with the supplied bullets, and didn't really provide a great deal more to grab onto when dirty. I ended up tossing em.

The caps do look nice.

Not sure why the bad reviews. These plugs are amazing. You obviously need to know how to solder. Tin the wires first and then attach it to the bullet plugs. If the cap doesn't slide on you used too much solder. Simply take the iron and start to round off the edges and the caps will fit nicely. Use pliers to pop them on ans the set screw to keep them on. I will never use naked bullets ever again. Not only are these marked for easy identification, they provide you a cap to pull on when you remove them from the battery so you're not pulling on the wire itself

Very nice looking! Really cleans up the bullets and makes them easier to pull out without putting strain on the wire or solder points. I had no problem installing them, or with them coming loose or having any other type of issue. I have them on all my cars now.

I've had the same experience I didn't buy them here on A Main. I bought them locally I will say after a while they were out. They may be tight at the bottom but they're very loose at the top and wiggle around and has caused car shut off in the middle of a race.

An absolute joy to have. So easy to install, so much more grip on the bullets.

First, these look really cool and easy to pull out of your battery. The bullets fit snug at first but I had one get loose after a few uses and I’m loosing contact with my battery. It was worth a shot but I’m going back to XT connectors.