Tekin FXR ESC/Pro Motor Rock Crawling Combo (40T)

Tekin FXR ESC/Pro Motor Rock Crawling Combo (40T)
Price: $159.99
Discontinued Online
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.

This is the Tekin FXR ESC/Pro Motor Rock Crawling Combo, with an included 40 Turn Pro Hand Wound Motor. The FX-R and T Pro Series Combos are designed for pure Rock Crawling performance. The FX-R coupled with a T Pro Series Brushed Motor gives you the edge over the competition with its tiny footprint, improved drag brake resolution with lock-down holding power, adjustable reverse type with reverse delay, no reverse or instant reverse, ultra smooth low speed and precision throttle and braking response.
 
The Pro Hand Wound motors give you the punch or the creep when and where you need it. The lower turns give you that increase in wheel speed many are looking for in todays setups Whether crawling the rocks or hopping over them. Using the same Larger Comm, Lay Down Brushes, Precision balanced hand winds as Tekin's previous trail proven pro motors, the Tekin Pro Hand Wound T series motors and the FX-R combo step you up to smarter, smaller, faster electronics.   

Features:

  • ESC
    • Ultra-smooth and Precise Throttle and Braking Control
    • Easily Access Programming, Anywhere, Anytime
    • HotWire PC Interface for Advanced Programming and Updating
    • On-Board Temperature Indicator
    • HDAC: High Density Copper PCB's
    • Gold-plated Solder Posts for Easy Wire Replacement
    • Self Test Diagnostics and Factory Reset
    • Pit Tune Mode
    • DGF2: Digital Glitch Filtering V2
    • QuickTune™ Programming
    • One-Touch Radio Calibration
  • Motor
    • High Torque Spec's
    • Precision Balanced Pattern Wound
    • Completely Rebuildable
    • 10mm Commutator
    • Laydown Brushes for Increased Bottom End Torque


Specifications:

  • ESC
    • Controls: Forward/Brake/Reverse
    • Input Voltage: 2S-3S LiPo / 4-9S NiMH-NiCD
    • BEC: 6.0v @ 3amps *External BEC required for 3S applications
    • Motor Limit 2S: 12T Brushed 540
    • Motor Limit 3S: 35T Brushed 540 Crawler
    • Throttle Profiles: 7 choices on board
    • Reverse Type: None / Immediate / Delay
    • Reverse Strength: 11 steps on board
    • Drag Brake: 11 steps on board
    • Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
    • Dimensions: 1.1x0.80x0.40" (28x20x10mm)
    • Weight: 0.63oz / 18g
  • Motor
    • Input Voltage: 2S-3S LiPo/10 cell NiMH
    • Shaft Diameter: 0.125" / 3.25mm (fits 1/8" pinions)
    • Motor Size: 2.07x1.42" (52.7x36mm)
    • Motor Weight: 6.33 oz (179g)

This product was added to our catalog on September 30, 2014