Tekno RC V4 Brushless Kit (Mugen MBX6T/42mm Motors)

[TKR4509]
Read Reviews
5 (1)
Write a Review

This is the Tekno RC V4 Brushless Kit, and is intended for use with the Mugen MBX6T 1/8 scale truggy. Tekno RC brought you the first 'electric specific' 1/8th chassis, the first 1/8th slipper system, and the strongest most secure motor mounting system available anywhere. The V4 kit represents state of the art in 1/8th Electric Offroad. With 50/50 Left/Right balance and 50/50 Front/Rear balance, no other platform comes close. Throw the lowest overall CG available into the mix and you have a package that outperforms the competition. This translates to a car that is more consistent, uses less power, and is easier to drive faster.

NOTE:  This Tekno V4 truggy kit (TKR4509) no longer includes a rear chassis brace. This is a Losi part (LOSA4414) and is required for operation of the vehicle with the Tekno kit installed. Running without the brace will compromise the durability of the chassis. 

All New Chassis Layout: To start, the center differential was moved towards the rear of the vehicle to make better use of the space available on the chassis. As a result, the battery is tucked as close to center, as far forward, and as low as possible. This allowed the center driveline to be straightened for most of the popular platforms providing improved efficiency, increased durability, and less heat. The motor is turned around and moved forward for better steering response while balancing perfectly with the battery Left to Right as well as Front to Rear. Lighter components such as the ESC and optional brake servo are placed low and towards the rear.

New Radio Box, ESC Tray, and Transponder Mount: The V4 radio box is a very versatile little box. Plenty of room for today's most popular receivers and a modular design allows it to be used on both the V3 and V4 chassis, as well as DIY projects requiring a compact receiver box. It can be mounted on any V3 chassis where the mechanical brake servo would normally be mounted. On the V4 chassis, it can be mounted along side the steering servo in front or in back where the mechanical brake servo would go - it's your choice. An integrated antenna mount completes the receiver box package.

The new ESC Tray is lighter and mounts lower to the chassis than the V3. The softer plastic material safely cushions the ESC and sits a mere 7mm off the surface of the chassis. A new transponder mount makes transponder placement an easy task while remaining lightweight, versatile and durable.

Battery Tray: The V4 truggy kits include a longer 165x52mm tray for use with bigger batteries that are better suited for truggy applications. It is also sunken in to the chassis for lower CG and uses the proven and durable 3-strap system that ensures your battery doesn't move during use. The tray is secured with countersunk screws and has a compact footprint that can also be used for those DIY projects.

Power Delivery Options: No other platform on the market provides as many useful power delivery options 

  • Direct Drive (standard pinion) + Motor Brakes
  • Direct Drive (long shank pinion) + Motor Brakes (moves the motor forward for better steering response)
  • Direct Drive (long shank pinion) + Mechanical Brakes
  • Traktion Drive + Motor Brakes
  • Traktion Drive + Mechanical Brakes
  • Elektri-Clutch + Mechanical Brakes
NOTE: Pinion Gear, Traktion Drive, Elektri-Clutch, clutch bells, and shoes are sold separately, and are not included in this kit.

Kit includes:

  • Hard Anodized CNC Machined 7075  Aluminum Chassis
  • Black Anodized CNC Machined 6061 Aluminum Motor Mount (42mm, for Castle, Tekin)
  • Hardened Steel Front and Rear Center Driveshafts
  • Battery Tray
  • Battery Straps
  • Receiver Box
  • ESC Tray
  • Mud Guards
  • Servo Mounts
  • Transponder Mount
  • Truggy kits include rear chassis brace and longer battery tray. Rear brace (LOSA4414) is required to complete conversion.

This product was added to our catalog on December 9, 2010.

DmG
Verified Owner
Thursday, Jul 14 2011 (about 4 years ago)
Tekno RC V4 Brushless Kit (Mugen MBX6T/42mm Motors)
Excellent kit. The V4 offers a much improved electric platform for the MBX6T. I've found it to be well balanced and extremely well thought out in its design. If you're thinking of going electric on your MBX6T, don't cut corners with such a high end platform and just buy a motor plate and battery tray.. go ahead and get this kit. You'll thank me, the people at Tekno have really done their homework. Side note- You should also consider the Elektri-Clutch / Traktion Drive setups for your truggy as well. I was very skeptical but I'm a big advocate now that I've used the system- it gives all the benefit of nitro and all the benefit of electric in one truggy. I couldn't be happier with my setup.
Discontinued
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Stock Notification

Please Log in to receive a notification when this item arrives in stock.

Manufacturer Info
Browse other products from Tekno RC