Perfect Regulators Perfect Regulator "Flex Reg Trio Pro" Voltage Regulator w/Failsafe & Glow Dri

This is the "Flex Reg Trio Pro" CCPM Voltage Regulator with Switch from Perfect Regulators. You have asked for it and Perfect Regulators delivered. Perfect Regulators have combined the Flex Reg Pro, Safe Switch and Push Button Glow Driver into one package, so there is no need to worry about installation space...all three are combined into one convenient package!

This unit works just the same as the regular Flex Reg Pro as far as how the voltage is supplied to the RX and Cyclic Servos, but it has an igniter and Safe Switch built in! The Push Button for the Glow Driver, Status LED's and Switch/Pins to turn the regulator on/off can be remotely mounted up to 12" away from the regulator. The Switch Version has a small Mechanical Switch located on the end of the Remotely Mountable Switch Board.

This unit will allow upwards of 11.1v input from an array of battery technologies, (Ni-Cd, Ni-Mh, Li-Ion and Li-Po). Output Voltage is user adjustable within a range based on the input voltage supplied to the unit. With a 7.4v input, the Voltage range can be set anywhere from 4.8v - 6.5v and with an 11.1v input, you can go upwards of over 8.5v.* The best way to set the Voltage Output is through an already connected Electronic Device (ie... GV-1) that displays Voltage. Otherwise any Volt Meter would work fine.

*NOTE: For nominal performance, use a 7.4v input voltage

  • Min. Input Voltage: 7.4v
  • Suggested Input Voltage: 7.4v - 11.1v**
  • CCPM Output Voltage w/ 7.4v: Adjustable 4.8v - 6.5v @ 10A
  • CCPM Output Voltage w/ 11.1v: Adjustable 4.8v - 8.5v+ @ 10A
  • Rx Output Voltage: Constant 5.3v @ 3A
  • Max. CCPM Amp Rating: 16A
  • Max. RX Amp Rating: 5.5A
  • Heatsink Material: Aluminum
  • Length of Lead Plugs: 6" Each
  • Plug Type: Universal
  • Length of Glow Driver Leads: 8" each
  • Glow Driver Plug Type: Alligator Clip / Ring Terminal
  • Switch Lead Length: 12"
  • Size: 60x30x9mm
**NOTE: We suggest that if you are going to be running the output voltage under 7v to use a 7.4v Input. Only use 11.1v if you are going to be running the output over 7v.

This product was added to our catalog on October 18, 2010.

Low Price: $129.99
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Stock Notification

Please Log in to receive a notification when this item arrives in stock.

Manufacturer Info
Browse other products from Perfect Regulators