Manutech Racing LiPo Plate w/Pockets (Cyclone TC)

This is a optional LiPo Plate with Pockets, and is intended for use with the Hot Bodies Cyclone TC. CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 125 grams. If less weight is required, simply enlarge the pre-drilled holes. This plate has pockets in it for the hump style lipo packs.

This lipo tray was designed and tested on the following lipo batteries:
  • Orion 3200 / 3600 / 3800
  • IP 3800 35C
  • 3Racing 3700
  • SMC 4000
  • Size of the pockets for the humps are .500 inches x .360 inches x .070 deep
  • Pocket centers are .915 inches along the length and 1.285 inches along the width
  • Overall size: 5.400 inches x 1.954 inches x .250 inches thick (total thickness)
  • Size of Battery Slot Tabs: 0.650 inches wide 1.835 long x 0.080 inched deep
  • Spacing of Battery Slot Tabs: 0.915 inches
  • Max Width for Lipo Battery being used: 1.850 inches
  • Max Length for Lipo Battery being used: none
  • Max Height for Lipo Battery being used: Tray adds 0.050 inches
ManuTech Comments:
  • tray is centered on frame cutouts, and should still allow the use of the tape slots
  • tabs are machined slightly smaller than the slots in the chassis, but due to variations in manufacturing (of the chassis and/or battery tray), it may be necessary enlarged the cutouts in the chassis slightly with small grinder
  • it will be necessary to grind some material off of the bottom front side of the right head. This amount will vary with the height of the battery being used

This product was added to our catalog on December 21, 2009.

Low Price: $44.99
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Stock Notification

Please Log in to receive a notification when this item arrives in stock.

Manufacturer Info
Browse other products from Manutech Racing