| Displaying 1 to 20 (of 23 reviews) |
Result Pages: 1 |
|
 |
|
|
This is the greatest servo on the market! I hope hitec uses the components from this servo for years to come. |
|
|
|
| 1 of 1 customers found this review helpful. |
|
|
|
Absolutely amazing servos! Toughest, best performing servos on the market! I wouldn't run any other brand servo in my race rigs. If you want the best of the best, forget the rest! Hitec is the best!
The titanium gears are phenomenal! The motors are top notch and the new G2 circuitry is even better! These servos are also known to handle 7.4v 2s lipo power. The new HV stuff is absolutely fantastic as well!! |
|
|
|
| 1 of 1 customers found this review helpful. |
|
|
|
I have this servo for my steering on my Matrix TR (soon to be on a ST-RR :) very dependable and durable. Was at a race and got crossed up with another guy through a wide open swiping corner and the truggy went up on 2 wheels and as i corrected i got ran over and pushed off the track (mind you i was still on the throttle last corner for 2nd place) slammed into a post with the front right corner. The impact ripped the entire front corner off and this was the first race with the HS-7955TG servo and[…] |
|
|
|
| 1 of 1 customers found this review helpful. |
|
|
|
I'm using this for steering in my 1/8 losi 8ight and it is a BEAST! Reaction is super quick, no lag or "dead spots" under heavy steering. Ive had servos before on rough tracks act like they were getting beat around, this servo has zero flaws and will not be distorted no matter how hard you crash or how hard your pushing your car. |
|
|
|
| 1 of 1 customers found this review helpful. |
|
|
|
no money to waste, no time to waste, if you want the best this is the best you can get! |
|
|
|
| 1 of 2 customers found this review helpful. |
|
by Leif - Rating:   Verified Owner |
Tuesday, July 05, 2011 |
|
|
I bought this Hitec Servo for my 1/8 Mugen MBX-6 ECO and I have to say that this is the most precise, quietest but also fastest servo I've ever had. But be aware that this baby draws a lot of power from your receiver/BEC, in order to ensure proper function and to avoid glitching install a simple voltage saver on your receiver to make sure that the servo is covered with enough power. I installed the voltage protector from Spektrum (part no. SPM1600) and ever since this has just worked perfectly o[…] |
|
|
|
|
|
|
|
i am running this servo in a rc8be on 4s. This i have to say is the best servo i've ever owned. |
|
|
|
|
|
|
|
Great servo for 1/8 nitro racing.Have this for my steering and they work just fine.A bit pricey but u get more than what u pay.
Highly recomended!! |
|
|
|
|
|
|
|
I tell everyone that Hitec servos are the best, PERIOD!! Spend the money one time and your servo problems are solved.I have been using Hitec for years,first in my helis back in the day,now in my 8th scale racers.They constantly deliver day in and day out and the service from Hitec (if you ever need it) is amazing! You won't be disapointed!! |
|
|
|
|
|
|
|
This thing runs on straight LiPo and lasts forever under harsh conditions. I've been running four of these in a buggy and truggy without regulators for over a year now. There simply isn't a better servo on the market. 10 stars. |
|
|
|
|
|
| by Wheezy - Rating: Verified Owner |
Thursday, January 21, 2010 |
|
|
Having good luck with these in the 1/8 Losi 8t2 and Losi 8e2. Flawless so far and plenty fast enough. |
|
|
|
|
|
|
|
One of the best servos! It's all I use in my 1/8 scale buggy and truggy. I have had no problems with this servo. Fast, strong and water-tight. I have had problems with Hitec cheaper servos and what you won't get with any other servo company is Hitec customer service, send it back and they make it right. If you don't want to worry about your servos run this one! |
|
|
|
|
|
| by Cory - Rating: |
Saturday, August 01, 2009 |
|
|
Best Servo on the Market, because it is backed by Hitec's superb customer service. No other company can compete with the quality of this servo and it's support. It can also run 2 cell lipo unregulated. |
|
|
|
|
|
|
|
Have one each for my Revo and Z01-B. Steering is awesome but does have a problem with comming back to center. Has plenty of power. |
|
|
|
|
|
|
|
I'm using one of these for my steering atm. I plan to get another for my throttle/brake. Amazing servo. Must have!!! |
|
|
|
|
|
|
|
I just replaced a hitec 5645mg with one of these for steering on my losi eight, all I can say is wow! very quick and powerful! I made the perfect choice. |
|
|
|
|
|
|
|
Very nice servo. Seems faster than .15 but still can turn the wheels of my mbx5t on carpet. Gonna get another one for throttle |
|
|
|
|
|
|
|
Great Servo. I use them for steering and braking in both my Mugen MBX5R abd MBX5T. They are awesome and take a beating. The best servo out there, period. |
|
|
|
|
|
|
|
I have this servo in my steering position on my Kyosho Inferno. I use a Futaba 3PK Transmitter and a Futaba R113ip receiver. This Servo is just Marvelouse. I am totally satisfied with both the power and the speed. This has to be the best Servo out there right now. It is a bit pricey but is well worth it if you want reliable power and response with no hastles and no headachs. This is by far the best servo I have owned. I had a futaba S9451 in both the steering and the throttle /Brake posit[…] |
|
|
|
|
|
|
|
Wow ROACH another product you bought at your imaginary hobby store where you buy your products . SSSSOOOO many reviews without buying anything must be hard to keep track of the bullcrap . I spend alot of money here unlike you , so save your reviews for someone who cares . I've always had some type of HITEC servo in one of my vehicles and they always treat me good . As for you Merdith go pretend your a pro somewhere else . |
|
|
|
| 0 of 1 customers found this review helpful. |
|
| Displaying 1 to 20 (of 23 reviews) |
Result Pages: 1 |
|
|
|
