| Displaying 1 to 12 (of 12 reviews) |
Result Pages: 1 |
|
 |
Eric Telles - Rating:  |
Sunday, January 16, 2011 |
|
|
i bought the front and rear set yesterday built them and put them in. ran them today and broke one within two runs on a 7.4 lipo 35c battery. wouldnt recomend the rear set to anybody! |
|
|
|
| 5 of 5 customers found this review helpful. |
|
Victor Miller - Rating:  |
Sunday, January 09, 2011 |
|
|
the two set screws that hold the cvd on the diff output shafts are a poor design, trouble since day one. the steel used in the cvds is not up to mip's normal quality, wear problems and I have snapped axles. I have used several mip cvd kits on oher vehicles love them. This set is not up to mip's standard. |
|
|
|
| 2 of 2 customers found this review helpful. |
|
Rob Sannes - Rating:  |
Tuesday, May 14, 2013 |
|
|
I Have been running this set for a season now. The set screws from the outdrive have come loose. But since I replaced them with 4 X 2.5 X 12 mm screw shafts and blue tread locker, They have been flawless. I will buy them again. |
|
|
|
|
|
Robert - Rating:  Verified Owner |
Saturday, February 23, 2013 |
|
|
THESE SUCK!!! Great quality but since i've put these on my Slash 4x4 back in november they've stripped 3 sets of wheels stock/proline/jconcepts they've shreaded my rear bearing carriers constantly blowing out bearings and are more difficult to get off then they're worth i only run a 2S eco power lipo and have had nothing but problems with these |
|
|
|
|
|
| Graziano Cavallari - Rating: Verified Owner |
Wednesday, May 16, 2012 |
|
|
after breaking countless stock traxxas transmission shaft (by the way, they really suck), i went with front and rear mips. never had a problem since. plug and forget. remember to put loctite (blu is enough easy to remove) on both shafts joints and axles, and to grease on contact areas. price is really high, but i definitly spent more in stock shafts... for newcomers, get them BEFORE breaking your first stock shaft (you will) |
|
|
|
|
|
Jerzinho - Rating:  |
Sunday, February 19, 2012 |
|
|
Using a mamba monster, i immediately change original parts by these ones. Several months after, lot of wear, so i went back to the original ones. Finally, it's durable enough.
So finaly, i dont find these CVD so good, especially at this price. I think MIP proposes other model.
In adition, they are quite heavy! |
|
|
|
|
|
| REGIS GUERRA DE SOUSA - Rating: |
Saturday, February 18, 2012 |
|
|
i lost my money!!!! they have broken in a few days, the original is better |
|
|
|
|
|
| Kale Heibult - Rating: |
Thursday, December 29, 2011 |
|
|
Running X-Duty's on front and rear. Set screw design is a little questionable, but no other issues. Finally used red loctite instead of blue and the set screws haven't backed out since. Using stock VXL system with a 7.4v 40C LiPo. Axles seem durable and the driveshafts themselves would probably work on a Quad. Roll pins are massive. These things are beefy!! |
|
|
|
|
|
| Erik Nelson - Rating: Verified Owner |
Thursday, November 17, 2011 |
|
|
These are great no more breaking drive shaft's. the only problem is the set screws. My solution to this problem is put a LITTLE drop of CA glue/tire glue on them and quickly screw them in. Problem solved. |
|
|
|
|
|
| Gary Henthorn - Rating: |
Friday, July 29, 2011 |
|
|
I also broke rear Axel. in one day? Broke right at Pin hole. |
|
|
|
|
|
| Don Garrison - Rating: Verified Owner |
Sunday, April 17, 2011 |
|
|
I have been running these cvds in the front and rear, with 2 cell lipos and a novak 4.5 for a long time, never had a problem with them. |
|
|
|
|
|
| Brad Currie - Rating: Verified Owner |
Wednesday, September 07, 2011 |
|
|
I've been running the front and rear x-duty axles for several months with a Mamba Max Pro, hardened spur and pinion gears and 3s 5000 lipo. I haven't broke one of the axles yet-and I've bashed the truck pretty hard. The only complaint I have is the Allen screw that holds the pins in kept backing out. Good locktite solves the problem. |
|
|
|
| 0 of 1 customers found this review helpful. |
|
| Displaying 1 to 12 (of 12 reviews) |
Result Pages: 1 |
|
|
|
