This is the RD Logics Infrared Thermometer with Laser Pointer (with yellow trim)! This temp gun is great for measuring the temperature of your engine. Note that like all Infrared temperature guns, it is always a good idea to keep the end of the gun clean. If you get dirt or debris in the end of the gun it can affect the readings, so spray a little denatured alchohol on the end of the gun and blow it off with an air compressor. Also make sure the batteries are fresh, as dead batteries will also make a temperature gun measure incorrectly.
Specifications:
- Temperature Range: -20º to 320ºC
- Temperature Display: 0.1ºC or 1.0ºF
- Accuracy: ±2%
- Typical Distance to target: 200mm to 600mm
- Response Time: Approximately 0.8sec(800ms)
- Spectral Response: 8-14um
- Emissivity: Fixed at 0.95
- Ambient Operating Range: 0 to 50ºC (32 to 120ºF)
- Relative TEMP Humidity: Tested at 93%RH at 30ºC Noncondensing
- Storage Temperature: -20º to 65ºC without battery
- Power: 9V Alkaline (Not Included)
- Typical battery life: 12hrs
- Display: Custom 3 digit 10mm LCD
- Distance to Spot Size: 8:1
- Celcius / Fahrenheit Selection
- Laser Pointer Selection
- Data Display hold: 15 Seconds
- Backlight Display Selection
- Auto Power Shut Off
- Carrying Pouch
To Activate/De-Activate Laser Pointer - Press and hold Trigger button and press LAS button.
NOTE: If your temperature gun starts to read values that appear
to be off, it probably means the battery is going flat. Please replace
the battery, and the readings should be accurate again.
|
