Bob Smith Industries FINISH-CURE 20 Minute Epoxy (4 1/2oz) [BSI209]

Bob Smith Industries FINISH-CURE 20 Minute Epoxy (4 1/2oz)
[BSI209]

Low Price: $6.79

This item earns up to 7
Customer Rewards Points!

In Stock!

Free Shipping Eligible!
(See Details)

This is a four and a half ounce package of Bob Smith Industries FINISH-CURE™ 20 Minute Epoxy. FINISH-CURE™ 20 minute epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all the BSI epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85*F or when applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70*F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spackling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.

This product was added to our catalog on Wednesday, April 08, 2009.

Quantity:

Customers who bought this product also purchased

Energizer Max AA Alkaline Batteries (8)	Thunder Tiger 85T Main Spur Gear	Traxxas 1/16 E-Revo VXL 4WD Brushless Truck (w/Battery & Wall Charger)
E-flite 9x7.5 Slow Flyer Propeller (2)	ParkZone Li-Poly Battery Pack (3.7V/70mAh) (Cessna 210/Citabria)	Traxxas NiMH 1100mAh 5-Cell Hump Receiver Pack
Du-Bro 4-40 x 3/4" Socket Cap Screws (4)	Du-Bro Mix-It-Stix	Futaba S3305 High Torque Servo w/Metal Gears