|
This is the Align 3S1P 850mah, 20C Lithium Polymer battery. This is designed to fit the Align T-Rex 250 helicopter kit, but can also be used in other applications requiring a battery of this size.
Specifications:
- Voltage:11.1V (3S1P)
- Capacity: 850mAh
-
Rating:20C continuous, 25C burst
-
Dimension: 55x30x22mm
-
Weight: 68g
NOTE:
When using high energy Li-poly Battery, please do not over-discharge,
over-charge batteries, or result over-high temperature. Discharging
capacity can't exceed 80% of the max capacity after full charging to
ensure a good cycle performance.Recommend to full charge a brand new
battery before using and only discharge the battery 50% for first 5
times to make a good efficiency of the battery. Please make it a habit
to always count time for flight, or please set a low voltage protection
on ESC (Cell voltage after stopping using can not lower than 3.4V). Do
not use the battery at insufficient of voltage.
Do not expose batteries to sunshine or store/ charge batteries at the
temperature up to 35℃ in a airtight car. The environment high
temperature could cause the damage or the danger of burst. If the
battery becomes hot while high current discharging or flying, please do
not charge the battery immediately. Wait to cool down(about 20 mins),
then inspect to recharge. If against follow the original factory using
rules, possibly cause the battery to inflate or any dangerous accident
happens. |
