Novak Drift Spec Brushless Motor (7.5T) [NOV3467]

Novak Drift Spec Brushless Motor (7.5T)
[NOV3467]

~~Low Price: $82.99~~
Special: $68.99

This item earns up to 69
Customer Rewards Points!

In Stock!

Free Shipping Eligible!
(See Details)

With input from the top drifters of the world, Novak has developed the specially designed Drift-Spec Brushless Motors (#3466-3468). These 540-size sensored brushless motors include the Novak 13mm Neodymium Sintered rotor for improved initial throttle response and natural drag brake.

Available Motor Winds
Novak’s Drift-Spec Brushless Motors are available in three motor winds:

Drift-Spec – 6.5T (Kv=5,700; Watts=370) provides the most power to light up your tires and excels on large tracks (#3466).
Drift-Spec – 7.5T (Kv=5,200; Watts=340) is the best all-around-motor with a great balance between power and run time. It also works well on medium-sized tracks (#3467).
Drift-Spec – 8.5T (Kv=4,500; Watts=280) has the smoothest power response and longest possible run time. The 8.5T is also ideal to use on small tracks (#3468).

Sensored Design
Novak’s Drift-Spec Brushless Motors have sensor-based design. The ESC is always aware of the rotor position. That knowledge provides the motor with superior starting torque and continuous synchronization for smooth, controlled low-speed driveability and consistent brakes – a must for drifting! The Drift-Spec series of motors also features a shielded sensor cable and a completely rebuildable design.

The Drift-Spec motors can also be factory wired to the SLYDR Brushless Drift ESC (#1712) to create one of three SLYDR Brushless Drift Systems (#3066-3068).

Features:

Specifically designed for drift vehicles
Nickel-plated, high-strength 13mm Sintered Neodymium rotor for increased motor acceleration, improved initial throttle response, improved performance in high-temperature conditions, and natural drag brake
Sensor-based for excellent braking and low-speed driveability
Shielded sensor cable with sheathed sensor wires
Oversized front bearing for increased load handling and bearing life
Lightweight, ribbed end bells
Provides approximately 20% longer run-times compared to brushed motors
Direct-Solder Wiring Tabs for flexible soldering options
Thermal Overload Protection (when used with Novak SLYDR Drift or GTB ESCs)
Minimal Maintenance and Low cogging
Rebuildable design: user-replaceable rotor (#5909) and user-replaceable front end bell/bearing and rear bearing (#5919)
Meets RoHS compliance and includes 120-Day Warranty
Designed, hand-wound and dyno-tested by Novak in Irvine, Calif.

Specifications:
Turns: 6.5 (#3466), 7.5 (#3467), 8.5 (#3468)
Design: Sensor-based
Input Voltage: 2S Li-Po cells or 4-6 NiMH cells (1.2 volts/cell)
Magnet: 13mm Nickel-plated, Sintered, high-strength Neodymium
Watts: 370 (#3466), 340 (#3467), 280 (#3468)
KV (unloaded): 5,700 (#3466), 5,200 (#3467), 4,500 (#3468) RPM/Volt
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Motor Weight: 6.61 oz. (187 g)
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
Bearing Size: 1/2” x 3/16” (12.7x4.8mm)
Protection: Thermal

This product was added to our catalog on Tuesday, October 14, 2008.

Quantity: