|
This is the Thunder Tiger Mini Titan E325 "Super Combo" 3D Electric Powered
Ready To Fly Helicopter! This is a Ready To Fly helictoper that comes with a 6-channel computer radio, motor, servos and gyro all installed and ready to go! All you need to do is slide the tail boom assembly into the main frame, charge up the battery and fly (battery charger not included)!
The E325 Super Combo Ready To Fly helictoper contains the following components:
- Thunder Tiger "Ripper" OBL 29/35-10H Brushless Motor
- Ace BLC-40 Electronic Speed Control (ESC)
- TG-6100M Heading Lock Gyro & E-CCPM Mixer
- SkyTech T6i 6-Channel FM Computer Radio w/ 8-channel receiver
- 800mAH rechargeable transmitter battery and charger
- Ace C1016 Servos
- Ace 11.1V 2200mAh Lithium Polymer battery pack (charger not included)
The
Titan E325 is a mini RC Helicopter of easy approach. Without noise,
pollution and pressure, you can fly it in the park and just have fun.
Whatever flying style you like, you will be 100% satisfied with this
fine machine. With whole new design, the helicopter is stable and
quick. You can fly it tenderly and you can fly 3D. This helicopter is
simply the best!
Features
- 120° e-CCPM electronics cyclic collective pitch mixing
- Rigid frame design eliminates flex during 3D maneuvers
- Constant driven Auto-Rotation system
- Interlocking 3 piece frame design
- Rigid one piece-landing skid
- Anti-Rotation swash guide
- Belt driven tail system
- Rear servo mount
Specifications:
Full Length of fuselage: 25.74"
Full width of fuselage: 4.72"
Total height: 8.3"
Main rotor diameter: 28.66" ~ Max 29.45"
Tail rotor dia: 6.14"
Gear ratio: 1:10 ~ 15:4.4
Full equipped weight: 26.50oz
Needed To Complete:
- Lithium Polymer battery charger for the included 3S/2200mAh battery
- CA glue for main blade grips
TG-6100M Heading Lock Gyro & E-CCPM Mixer
The
TG-6100M is an E-CCPM control board, which is combined with heading
lock gyro and an E-CCPM mixer. The heading lock gyro helps to control
the heli, and the E-CCPM mixer program makes it possible to fly the
Mini Titan E325 with a normal 4 ~ 6 channel radio without CCPM mixing.
The normal flying mode and aerobatic mode are established in the
program, if you are using a 4~5 channel radio, you can do the normal
flying, if you are using 6 channel radio, you can perform advance
aerobatic flying as well.
Ace C1016 Servos
The Ace
Hobby C1016 Ball Bearing Micro Servo is a reliable high torque servo
comes with quality bearings and is made of high impact material. This
servo works great on airplanes or helicopters. It has a J style
connector that will have to be trimmed to work with Airtronics, Jr, and
Hitec.
Thunder Tiger "Ripper" OBL 29/35-10H Brushless Motor
This
is the Thunder Tiger "Ripper" OBL 29/35-10H Helicopter Brushless Motor.
The Ripper OBL outrunner motors are designed for R/C electric
helicopters. Thunder Tiger provides a brand new range of brushless
motors to satisfy all your flying needs. Extremely high torque and mass
of power for a motor of its size. With the cooling design, you can get
the best efficiency out of motor.
Ace BLC-40 ESC
The
Ace 8041-H Helicopter Brushless Motor ESC (BLC-40) is designed for the
mini-sized electric helicopters. Capable of supplying up to 40 Amps of
continuous motor current. Small and lightweight, with a large heat sink
surface area. Perfect for the Thunder Tiger OBL series brushless
motors. And for safety consideration, there are built-in safety
features to prevent accidental motor startup when powering on.
|
