Thunder Tiger Mini Titan E325 ARF Plus Electric 3D Helicopter w/Motor, ESC, Gyro & Servos [TTR4710-A12]

Thunder Tiger Mini Titan E325 ARF Plus Electric 3D Helicopter w/Motor, ESC, Gyro & Servos
[TTR4710-A12]

Low Price: $339.99

This item earns up to 340
Customer Rewards Points!

Out Of Stock
You may back order this
item, and you will be notified when
it arrives in stock.

This is the Thunder Tiger Mini Titan E325 ARF Plus 3D Electric Powered Helicopter. This E325 ARF Plus kit includes all of the electronics needed to get you started flying your mini helicopter. Just add your own radio and receiver and you are ready for take off. The E325 ARF Plus kit contains the following electronic components:

Thunder Tiger "Ripper" OBL 29/35-10H Brushless Motor
Ace BLC-40 ESC
TG-6100M Heading Lock Gyro & E-CCPM Mixer
Ace C1016 Servos
Ace 11.1V 3S1P 2200mAh Battery

The Titan E325 is a mini RC Helicopter of easy approach. Without noise, pollution and pressure, you can fly it in the park and just have fun. Whatever flying style you like, you will be 100% satisfied with this fine machine. With whole new design, the helicopter is stable and quick. You can fly it tenderly and you can fly 3D. This helicopter is simply the best!

The Mini Titan E325 ARF Plus has the perfect combination of flying stability and the agility for 3D flying. This is the ARF Plus version of the helicopter, and comes 80% pre-assembled for you.

Features

120° e-CCPM electronics cyclic collective pitch mixing
Rigid frame design eliminates flex during 3D maneuvers
Constant driven Auto-Rotation system
Interlocking 3 piece frame design
Rigid one piece-landing skid
Anti-Rotation swash guide
Belt driven tail system
Rear servo mount

Specifications:
Full Length of fuselage: 25.74"
Full width of fuselage: 4.72"
Total height: 8.3"
Main rotor diameter: 28.66" ~ Max 29.45"
Tail rotor dia: 6.14"
Gear ratio: 1:10 ~ 15:4.4
Full equipped weight: 26.50oz

TG-6100M Heading Lock Gyro & E-CCPM Mixer
The TG-6100M is an E-CCPM control board, which is combined with heading lock gyro and an E-CCPM mixer. The heading lock gyro helps to control the heli, and the E-CCPM mixer program makes it possible to fly the Mini Titan E325 with a normal 4 ~ 6 channel radio without CCPM mixing. The normal flying mode and aerobatic mode are established in the program, if you are using a 4~5 channel radio, you can do the normal flying, if you are using 6 channel radio, you can perform advance aerobatic flying as well.

Ace C1016 Servos
The Ace Hobby C1016 Ball Bearing Micro Servo is a reliable high torque servo comes with quality bearings and is made of high impact material. This servo works great on airplanes or helicopters. It has a J style connector that will have to be trimmed to work with Airtronics, Jr, and Hitec.

Thunder Tiger "Ripper" OBL 29/35-10H Brushless Motor
This is the Thunder Tiger "Ripper" OBL 29/35-10H Helicopter Brushless Motor. The Ripper OBL outrunner motors are designed for R/C electric helicopters. Thunder Tiger provides a brand new range of brushless motors to satisfy all your flying needs. Extremely high torque and mass of power for a motor of its size. With the cooling design, you can get the best efficiency out of motor.

Ace BLC-40 ESC
The Ace 8041-H Helicopter Brushless Motor ESC (BLC-40) is designed for the mini-sized electric helicopters. Capable of supplying up to 40 Amps of continuous motor current. Small and lightweight, with a large heat sink surface area. Perfect for the Thunder Tiger OBL series brushless motors. And for safety consideration, there are built-in safety features to prevent accidental motor startup when powering on.

Accessories Needed:

A Radio System. Any 5 - 6 channel Transmitter can be used but one designed for helicopter use with Electronic CCPM Mixing and 6 or more channels is preferred. A receiver with 5 or more channels required.
Propulsion System - Lithium Polymer Battery You will need a Lithium Polymer battery with 2000-2200mAh capacity and at least 15C discharge rate. The ProTek R/C 3S Li-Poly 20C Battery Packs are excellent choices for sport and most 3D flying.
Main Rotor Blades Although this kit comes with wooden blades in the box that work well for general sport flying, they are not suitable for hard 3D flying. We highty recommend a set of after market 325mm blades, such as the Curtis Youngblood Radix 325mm blades (make sure you use the blade grip spacers that come in the package). Align T-Rex 450 blades will also fit if you use washers on the blade grips.
Lithium Polymer Battery Charger
Adhesives Epoxy, Instant setting Cyanoacrylate adhesive (CA), Anaerobics retainer (R48) & Threadlocking (T22).
Tools Screw, Needle and Ball Pliers, Nipper, Scissors, Hobby knife, Grease, Hex wrench set, Rubber bands & Double sided servo tape.

This product was added to our catalog on Wednesday, January 02, 2008.

Quantity:

Customers who bought this product also purchased

Thunder Tiger Socket Link Ball Screw	ProTek R/C 325mm Carbon Fiber Rotor Blades	Thunder Tiger Clutch Liner (R30/R50)
Racers Edge 18GA Heat Shrink Tubing (18")	Hanger 9 Micro Digital Tachometer	Deans Ultra Plug (1 pair)
Thunder Tiger Thrust Bearing Grease	Thunder Tiger 315mm Main Rotor Blade	Thunder Tiger Clutch (R30/50V2)