|
Novak is expanding the Havoc family of products – a name synonymous with affordability and reliability – with the inclusion of the Havoc Pro/Ballistic Brushless Systems – 3.5T-17.5T (#3130-#3135).
Novak has packed the Havoc Pro Brushless ESC full of programmability into one easy-to-adjust profile. The Havoc Pro includes a customizable Throttle Curve, which smoothes out throttle operation. In addition, the Havoc Pro’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. The dozens of adjustments allow drivers to fine-tune their vehicle’s throttle braking for better control and advanced handling.
But the customization doesn’t end with braking. Novak has also built into the ESC Li-Po Cut-Off Circuitry that prevents the batteries from going below the critical safety voltage level, and a Motor Rotation feature that allows the user to easily select the direction of the motor.
To complete the affordable system, the sensored Ballistic motors contain an easy-to-adjust timing assembly that alters the RPM range and features interchangeable wound stator construction, which creates dozens of racing options. Additionally, these sleek motors are built to ROAR/IFMAR specifications, boast a removable shielded sensor harness, and contain a 12.3mm nickel-plated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions. And like all Novak racing motors, these brushless motors are blisteringly fast, reaching speeds that will effortlessly satisfy any racer or basher.
System Specifications:
Motor Turns: 17.5T
KV: 2,200 RPM/Volt
Watts: 130
Sensor Harness: 9" (230mm)
Motor Size: 2.07"x1.41" (52.6x35.8mm)
System Weight: 7.96 oz (225.7g)
Input Voltage: 2S LiPo cells/4-6 NiMH cells (1.2V/cell)
ESC Footprint: 1.16"x1.49" (29.5x37.8mm)
On-Resistance: 0.00040 ohms @ 25 deg
BEC: 6V DC/ 3A
Voltage Cut-Off: 6.25V
Key Features:
- Sensor-based for excellent torque and low-speed driveability
- Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
- Rebuildable motor design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells
- Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears
- Nine adjustable parameters: Minimum Brake (10 settings from 3-50%), Drag Brake (10 settings from 3-50%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 2-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Li-Po Cut-Off
- Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling
- One-Touch Set-Up for quick, easy transmitter setup
- Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor)
- Novak’s Radio-Priority and Polar Drive Circuits
- Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink
- Meets RoHS compliance and includes 120-Day Warranty
|
