|
This is Arctic Silver Silver Adhesive Thermal Epoxy and contains two tubes containing a total of 7 grams of adhesive (3.5 grams of Part A and 3.5 grams of Part B) and a plastic reusable mixing wand. This product was originally developed for use with computer heat sinks to allow more efficient heat transfer and dissipation, but after extensive testing by A Main Hobbies team drivers, it has also proven to be effective for RC applications!
It can be used to lower the operating temperatures of electric motors, or ESC's by applying between their heat sinks and the contact surface. NOTE: This adhesive will PERMANENTLY bond a heatsink to an ESC.
Silver Adhesive Features:
- Made with 99.8% pure micronized silver.
- 62% to 65% silver content by weight.
- Superior thermal conductivity. Greater than 7.5 W/mK
- Temperature range: - 40°F to >302°F (Bond strength is weakened at temperatures
- below 32°F due to crystallization.)
- Negligible electrical conductivity: Arctic Silver Thermal Adhesive was formulated to conduct heat, not electricity.
NOTE: Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be keep away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause problems if it bridged two close-proximityelectrical paths.
CAUTION! Arctic Silver Thermal Adhesive is a permanent adhesive. Any components you attach together with Arctic Alumina Thermal Adhesive will stay attached forever.
Arctic Silver Thermal Adhesive should be kept cold and away from UV light (sunlight and florescent lighting). It is recommended that the unused material be refrigerated and allowed to reach room temperature prior to use.
NOTE: It is recommended that the application surface be
prepped with Arctic Silver ArctiClean 1 & 2 Thermal Surface Cleaner
& Purifier.
|