This is the T-Rex 600 Nitro RC helicopter from Align. The T-Rex 600 Nitro features the new G-10 Glass Fiber frame set and a bump resistance plastic canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal. The simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. The rigid frame design can also handle hard crashes without damage.
A +/- 14° collective pitch is possible for extreme 3D performance, and the clutch, fan and bell assembly provide a very smooth operation even at high RPM. The forward mounted tail servo helps to keep exhaust oil from entering servo, and pitch and all servos moved forward which also improves the CG. The fuel tank is designed so that no additional header tank is required.
The battery tray designed for easy and clean radio gear installation. The fuel tank capacity is 440cc for about 10 minutes 3D flying. The main gear ratio is 8.5:1, 1500-2200 Rotor RPM. A heavy duty tail with thrust bearings and 95mm Tail Blades is belt driven for incredible 50 sized performance. A super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
Features:
- New main gear with one-way bearing design for high torque.
- New flybar paddles feature light weight and sports.
- New flybar control set design.
- New tail boom supports.
- Bump resistance plastic canopyX1
- Fuel tube
- Fuel filter
- New Fuel tube clips
- New landing skid
Specifications:
- Length: 1160mm
- Height: 410mm
- Main Blade Length: 600mm
- Main Rotor Diameter: 1350mm
- Tail Rotor Diameter: 240mm
- Engine Pinion Gear: 20T
- Autorotation Tail Drive Gear: 180T
- Drive Gear Ratio: 8.1:1:4.5(E:M:T)
- Flying Weight: Approx. 3200g
Additional items needed to complete this kit:
|
