 This is an optional KDE Direct Universal Motor Mount & Pinion Support, and is intended for use with the Align T-Rex 550E, 600E, and 600ESP series helicopters (replaces stock Align part #H60033). The Universal Motor Mount provides the ability to run almost-all motor and gearing combination's available for the TREX 550E, 600E, and 600ESP series helicopters. With a unique Universal Motor Mount hole pattern, the design can accommodate all M4 x 25mm and M3 x 25mm motors on the market with a solid, four-bolt hole pattern for the motor installation and a strong and secure, t-channel lock system incorporated into the assembly. To adjust the motor pinion and main gear mesh, simply loosen the four side screws holding the mount to the frame, set the motor to the desired mesh, and then re-tighten the side screws for rock-solid hold.
NOTE: For proper operation, the length of the side rail screws is critical. The correct 3x0.5x8mm cap head screws have been provided with the kit for correct installation and proper instructions can be referenced using the installation diagram.
Specifications:
Weight: 30g
Includes:
- (1) TREX 550/600 Series Aluminum Universal Motor Mount Assembly
- (1) TREX 550/600 Series Aluminum Universal Motor Mount Plate
- (2) TREX 550/600 Series Aluminum Universal Motor Mount Rails
- (4) M4 x 0.7 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- (4) M4 Flat Washers (Zinc-Plated Alloy Steel)
- (2) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- (4) M3 x 0.5 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- (2) M3 Flat Washers (Zinc-Plated Alloy Steel)
|
