 The E-Flite Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flite’s powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.
Features
- Generous wing area for lighter wing loading
- Large control surfaces for precise control in high-alpha flight
- Exceptionally lightweight balsa and plywood construction
- Designed for use with E-flite’s Park 480 brushless outrunner motor
- Factory-painted fiberglass cowl and wheel pants
- Aluminum landing gear and steerable tail wheel
- Plug-in wings for easy transport
- Assembles in just a few evenings
- Covered in genuine UltraCote® and UltraCote Lite
Specifications:
Wing Span: 43 in (1090mm)
Overall Length: 40 in (1015mm)
Wing Area: 375 sq in (24.2 sq dm)
Flying Weight: 26–29 oz (740–820 g)
Motor Size: Park 480 BL Outrunner
Radio: 6 channels or more for proper mixing
Servos: Sub-micro (4)
CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm)
Prop Size: 12x6 Electric
Spinner Size: 1 3/4 in
Hardware Included: Yes
Speed Control : 35A-40A Brushless
Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po
Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm)
Scale: Park Flyer
Approx. Assembly Time: 4-6 hours
Needed to Complete:
- 6-channel transmitter (for proper mixing and dual rate capabilities)
- Micro receiver
- 4 sub-micro servos
- Park 480 BL Outrunner Motor
- 40A Brushless ESC
- 12x6 Electric Propeller
- Battery & Charger
|
