 This is the E-flite Leader 480 Park Flyer Airplane Kit. The nimble Leader 480 is the fun-to-fly sport plane that is ideal for anyone interested in precision aerobatics. Its light wing loading will put any intermediate pilot at ease when flying on the slow side of the envelope. But for those who really want to wring it out, the Leader’s symmetrical airfoil and classic pattern plane lines allow it to fly precision aerobatics with the best of them. Assembly is so simple, it could easily be flight-ready in a single evening. Plus, it's small enough to put in the backseat or trunk of a car and fly most anywhere park flyers are allowed.
NOTE: Shown with optional 1/9 Civilian Pilot (EFLA156) and optional 1.75-Inch aluminum spinner (EFLSP175) - sold separately.
Features:
- Attractive trim scheme
- Covered in genuine Hangar 9 UltraCote
- Balsa/lightweight plywood construction
- Quick assembly
- Perfect match for E-flite® Park 480 1020Kv motor (EFLM1505)
- Easy-access magnetic canopy hatch
- Two-piece wing with aluminum wing tube
- Factory-painted fiberglass cowl
- Wire landing gear
Specifications:
- Wingspan: 43.0 in (1090mm)
- Overall Length: 42.4 in (1075mm)
- Wing Area: 414 sq in (26.7 sq dm)
- Flying Weight: 2.44 lb (1.1kg)
- Motor Size: Park 480
- Radio: 5+ channel radio system
- Servos: DS76 servos
- Trim Scheme Colors: UltraCote White (U870), True Red (U866), Deep Blue (U873)
- CG (center of gravity): 3-3/8 to 3-3/4 inches (86-95mm) from the leading edge at fuselage
- Wing Loading: 13.6 oz/sq in
- Prop Size: APC 11x7e - 12x6e
- Spinner Size: 1-3/4 inch
- Speed Control : 40A ESC
- Recommended Battery: 3S 11.1V 2200mAh 30C Li-Po
- Flaps: No
- Control Throw (Ailerons):
- Low: 15mm up/down, 33% expo
- High: 20mm up/down, 40% expo
- Control Throw (Elevator):
- Low: 8mm up, 9mm down, 20% expo
- High: 18mm up, 20mm down, 30% expo
- Control Throw (Rudder):
- Low: 20mm right/left, 20% expo
- High: 30mm right/left, 30% expo
- Approx. Flying Duration: 7 minutes
- Scale: Park Flyer
- Minimum Age Recommendation: 14 years
- Experience Level: Intermediate
- Recommended Environment: Outdoor
- Assembly Time: 3-5 Hours
- Is Assembly Required: Yes
Needed To Complete:
- 4+ Channel Transmitter and Receiver
- Electric Motor and ESC
- 4 Sub-Micro Servos
- 11.1V 3S Li-Po Battery Pack (1800-2200mAh)
- Li-Po compatible battery charger
- Propeller
|
