|
This is the Arctic Silver Alumina Adhesive Premium Ceramic Thermal Epoxy set and can be used to permanently attach heat sinks to either electric motors, or ESC's. This
product was originally developed for use with computer heat sinks to
allow more efficient heat transfer and dissipation, but after extensive
testing by A Main Hobbies team drivers, it has also proven to be
effective for RC applications!
It can be used to lower the
operating temperatures of electric motors, or ESC's by applying between
their heat sinks and the contact surface. NOTE: This adhesive will
PERMANENTLY bond a heatsink to an ESC.
Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capacitive.
A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams of adhesive (2.5 grams each of parts A and B) and a plastic reusable mixing wand. (Approximately 3cc total adhesive.) Although lighter per set than Arctic Silver Adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area.
CAUTION!
Arctic Alumina Thermal Adhesive is a permanent adhesive. Any components you attach together with Arctic Alumina Thermal Adhesive will stay attached forever.
Arctic Alumina Thermal Adhesive should be kept cold and away from UV light (sunlight and florescent lighting). It is recommended that the unused material be refrigerated and allowed to reach room temperature prior to use.
NOTE: It is recommended that the application surface be prepped with Arctic Silver ArctiClean 1 & 2 Thermal Surface Cleaner & Purifier.
|
