|
This is the E-flite Park 300 Brushless Outrunner Motor, 1380kV. Ideal for 3D models 6-9 oz (170-255g), and sport and scale models 8-12 oz (225-340g) or models requiring up to 85 watts of power.
Features - Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
- High-torque, direct-drive alternative to inrunner brushless motors
- Ideal for models requiring up to 85 watts of power
- Integrated prop saver design
- Mount, prop adapter and hardware included
- External rotor design with 3.2mm shaft
- Low noise level
Specifications:
Type: Brushless Outrunner
Size: 180 / 280 replacement
Bearings or Bushings: Ball Bearings
Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or Up to 10x3.8 (2-cells) Slow Flyer
Voltage: 7.2 - 11.1V
RPM/Volt (Kv): 1380
Resistance (Ri): .33 ohms
Idle Current (Io): .40A @ 8V
Continuous Current: 7A
Maximum Burst Current: 9A (15 sec)
Cells: 6-8 Ni-Cd/Ni-MH or 2-3S Li-Po
Speed Control: 8-10A Brushless
Weight: 24g (.8 oz)
Overall Diameter: 28mm (1.10 in)
Shaft Diameter: 3.17mm (1/8 in)
Overall Length: 22mm (.90 in) |
