 This is the G-Force ProStart Adapter. The G-Force ProStart is an anti-shock drill/driver adapter which is designed to isolate the shock generated from a cordless drill/driver, preventing that shock from being transferred to the heli’s engine drive train. The G-Force ProStart uses dampers that isolate the shock from the cordless drill/driver to the nitro engine and the heli clutch system. The G-Force ProStart also incorporates additional dampers to soak the wobble vibration that can occur from long 6mm hex starter wands.
The G-Force ProStart will work with most of today’s starter wands. The G-Force ProStart has a standard 7mm hole for accepting the common 6mm hex starter wands.
Important Note: The Thunder Tiger TTR3801 starter shaft with a 6mm hex and a 7mm shaft diameter is ideal for the ProStart because it has a flat already milled onto the end to prevent slippage. If you currently have a 8mm or 5/6 clamp-on style 6mm hex end starter wand, you need one of the following shaft adapters:
Cordless drill/driver requirements:
- Torque Rated: 200 in-lb for 50 size
- Torque Rated: 400 in-lb for 90 size
- RPM: 1200 to 1400
|
