|
This is the RCE-BL35X "Governor Mode" 35 amp brushless electronic speed control from Align! The governor keeps the head spinning at a constant RPM to reduce the amount of throttle mixing necessary. The BL35X has three programmable throttle speed settings to support quick throttle response. BEC output voltage (6V) to show great performance on the torque & speed of servo. The small and compact PCB design for ease of installation and has a large heatsink for great thermal performance. High compatibility to work with 98% brushless motors in the market and the ultra smooth motor start is designed to run with all kinds of brushless motors. The power inlet adapts Japanese-made "Low ESR" capacitor in order to provide stable power source. The BEC power outlet adaptor is made with a specialty polymer aluminum electrolytic capacitor. It provides better noise filtering capability than other brushless ESC's in the market, and moreover to give more stable performance of RC receiver and BEC. The BEC adapts dual TO-252 package regulators. It provides great thermal performance with 2A peak current. Users can use the transmitter to operate the motor setting by Super stylized CPU. The throttle has more than 200 steps resolution that provides great controlling sense.
Specifications: - Continuous current: 35 Amps with proper air flow
- Surge current: 45 Amps for 15 seconds
- Supporting motor types: 2 poles to 10+ poles in/outrunner brushless motors
- Supporting maximum RPM: 2 poles (190,000 rpm)
- Supporting input voltage: 5.5V~16.8V
- Supporting battery types: Li-ion/Li-Poly 2~4 cells, Ni-Mh 6~12 cells
- BEC output: Max current 2A
- 2 cells Lithium/6~7 cells Ni-Mh (4 servos)
- 3 cells Lithium/8~9 cells Ni-Mh (3 servos)
- 4 cells Lithium/10~12 cells Ni-Mh(2 servos)
- Size: 45mmx23mmx12mm
- Weight: 25g
Note: If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by turning off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.
|
