E-flite 25-Amp Pro Brushless ESC

This is the E-flite 25-Amp Pro Brushless ESC featuring Advance Programming and Heat Sinks with pre-wired EC3 Connector and battery input and 3.5mm female gold bullets on motor output leads. This controller has been designed for use in radio control aircraft and to support continuous currents of up to 25 amps when using 2-3 cell Li-Po battery packs and up to four sub-micro servos. The ESC features a lightweight plastic case, with exposed, finned heat sinks for both the motor drive mosfets, and unlike many controllers, the BEC regulators give you a more reliable and powerful power supply for your servos.

Features

• Up to 25 amps continuous current with proper air flow
• Finned heat sinks for both the motor drive mosfets and dual BEC regulators to support up to 4 sub-micro servos
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cut-off with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
• Programmable throttle input range (1.1ms–1.9ms or Auto Select)
• Auto motor shut down if signal is lost or there is interference
• Programmable timing—2 user selectable ranges for use with a large variety of brushless motors
• Pre-wired connectors—E-flite EC3 on battery input and 3.5mm female gold bullets on motor output leads
• Soft start

Specifications:
Brake: Yes - Programmable
Continuous Maximum Current: 25A
Input Connector Types: 16 AWG with E-flite EC3 Connector
Output Connector Types: 16 AWG with 3.5mm Female Gold Bullet Connectors
Momentary Peak Current: 30A (15 sec)
Dimensions (WxLxH): 28x48x11 mm (1.1x1.9x.4 in)
Weight: 32g (1.2 oz)
Cells w/BEC: 2-3S Li-Po or 6-10 Ni-MH/Ni-Cd

This product was added to our catalog on December 5, 2007