Align GP750 Head Lock Gyro Combo (GP750+DS620)
AGNKX870015A
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
This is the Align GP750 Head Lock Gyro Combo.
GP750 Features:
- Utilizes Silicon Micro Machines (SMM) sensor with excellent stability to dramatically reduce in-flight tail drifts.
- Utilizes AHTCS (Active Helicopter Tail Control System) to compensate any drift caused by wind direction and force, as well as unintended yaw induced by helicopter itself during flight maneuvers.
- Tailor made specifically for use with high speed digital rudder servos. This gyro features high sensitivity and minimal reaction time, fully utilizing the potential of modern high speed digital rudder servos.
- Suitable for all sizes of helicopters, from micro indoor to large 90 size glow helicopters.
- Metallic dampening plate built into bottom gyro casing, dramatically increasing anti-vibration and anti-interference abilities.
- Features 1520μs pulse wide and 760μs narrow pulse wide frame rate.
- Digital/Analog servo switchable.
- Reverse switch.
- Rudder servo travel limit adjustment (ATV).
- Mode switch for large/mini helicopter.
- Delay adjustment.
- Gyro locking mode and gain can be adjusted remotely from the transmitter.
- Mini/Micro heli mode, suitable for T-REX250/450 (“STATUS” Red)
- Medium/large heli mode, suitable for T-REX500/600/700 (“STATUS" Green)
DS620 Features:
- Coreless Motor Design for fast speed, high efficiency, and low power consumption.
- 12 Bits signal resolution for smooth movements.
- Fast speed and high torque. High strength titanium alloy gears with high precision and durable structure characteristics.
- Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
- Supports digital & analog control signal.
- Powerful and precise servo, suitable for T-Rex 600/700 swash plate and rudder use.
GP750 Specifications:
Operating Voltage: DC 4.5~7V
Current Consumption: <80mA @ 4.8V
Angular Detection Speed: 500 degrees/sec
Operating Humidity: 0~65
RoHS certification.
Operating Humidity: 0%~95%
Size: 26x25x11mm
Weight: 14g
DS620 Specifications:
Stall torque: 8.0kg.cm(4.8V) 10.0kg.cm(6.0V)
Motion speed: 0.09sec/60°(4.8V) 0.07sec/60°(6.0V)
Rating voltage: DC 4.8-6V
Temperature range: -20°C~+60°C
Dimension: 40.3x20.1x36mm
Weight: 52.2g
Includes:
- (1) GP750
- (1) DS620
- (2) Double sided tape
- (3) Servo rudder piece
- (1) Set screw
- (4) Rubber damper
- (4) Brass grommet
- (4) Tapping screw for servo
This product was added to our catalog on March 24, 2009