Align T-REX 700E F3C V3 Super Combo Kit w/750MX, ICE 2 HV, Gyro, 4 Servos & CF Blades

This is the Align T-REX 700E F3C V3 Super Combo Kit. Developed specifically for F3C competition, the T-Rex 700E F3C was designed using Align's renowned technology and experience. F3C competition is judged on the precision and completeness of flight maneuvers, and requires not only pilot expertise, but also a precision machine. This incredible package includes not only the T-REX 700E F3C V3 Kit, but also a 3K Carbon Fiber Tail Boom and an Aluminum Tail Boom, a F3C 700mm Carbon Fiber Blade Set and 105mm 3K Carbon Fiber Tail Blades. Additionally, an Align 450kV 750MX Brushless Motor, GP900 Head Lock Gyro, three DS615 Cyclic Servos, one DS655 Tail Servo, with a Castle Creations EDGE HV 120 brushless ESC and a 6A External BEC included to finish off this awesome F3C super combo.

T-Rex 700E V3 features a redesigned rotor head with more adjustability, enabling more dynamic ratios for enthusiasts to choose from. A latch equipped battery mounting assembly with CNC aluminum alloy mounting plates for ease of battery replacement. High spec MOD1 112T helical main gear has been paired with a 12T motor pinion, with increase gear mesh surface to withstand the monstrous power loads. A high quality tail gearbox with thicker side plates was used for increased rigidity, and Teflon material has been applied at the tail rotor control rod and bellcrank ball link areas for increased longevity and minimized interference. Additionally, carbon tail pushrods with updated pushrod guides have been used to allow precise rudder control. 

T-REX 700E F3C V3 Features:

• Re-designed main rotor head assembly.
  
• Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
• Precision CNC machined aluminum pieces including elevator servo mount and rudder servo mount.
• Carbon tail pushrod assembly.
  
• Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
• Redesigned tail gearbox, combined with dual point mounted tail pitch control assembly to minimize slop and increase rudder control precision.
• Utilizes the highest spec and superior anti-wear material to increase the overall strength and durability for the torque tube drive gear. Effectively minimizes gear striping and crash damage.
  

GP900 Head Lock Gyro Features:

• Utilizes MEMS (Micro Electro Mechanical Systems) micro electronic sensors which are small, highly reliable, and highly stable.
• 16bit high processing speed CPU is used for ultra high resolution, resulting in higher rudder precision than previously possible, even on modern high powered helicopters.
• Compatible with Spektrum and JR satellites, traditional receiver not needed.
• Compatible with Futaba S-BUS system.
• Compatible with both digital and analog servos.
• Supports both wide and narrow band receivers.
• Integrated RCE-G600 speed governor function, thus GP900 can provide speed governor function without additional electronics.
• Suitable for all 200 to 700 size glow engine or electric helicopters, with higher vibration resistance than any other systems. Superior performance is achievable even with harder mounting foam tapes.
• Supports parameter setting through PC interface, as well as firmware updates.
• Anti-torque compensation. Optimal tail locking is achievable regardless of if the gyro is mounted upright or inverted.
  

T-REX 700E F3C V3 Specifications:
Length: 1343mm
Height: 424mm
Width: 210mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 24T
Drive Gear Ratio: 1:9.33:4.33
Weight (With Motor): 3230g
Flying Weight: Approx. 5200g

GP900 Head Lock Gyro Specification:
Operating Voltage: DC 3.5~8.4V
Current Consumption: <80mA @ 4.8V
Angular Detection Speed: 600 degrees/sec
Operating Humidity: -20℃~65℃
RoHS certification: Yes
Operating Humidity: 0%~95%
Size: 36.5x25.2x15.6mm
Weight: 11g

Includes:

• (1) T-REX 700E F3C Kits Set
• (1) Aluminum Tail Boom
• (1) 3K Carbon Fiber Tail Boom
• (1) F3C 700mm Carbon fiber blades
• (3) DS615 Digital servo set
• (1) DS655 Digital servo
• (1) GP900 Head Lock Gyro
• (1) 750MX Brushless Motor (450KV)
• (1) Castle ICE2 HV 120 Brushless ESC
• (1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
• (1) 105mm 3K Carbon Fiber Tail Blade Set

• Transmitter (7-channel or more, helicopter system)
• Receiver (7-channel or more)
• (2) 6S Li-Po 4500 ~ 5200mAh
• Dial Pitch Gauge

This product was added to our catalog on December 27, 2013