|
This is the T-Rex 600 Nitro Pro RC helicopter kit from Align. This
kit includes the Align Hyper 50 engine, Align high
performance muffler and the 2-in-1 Voltage Regulator/lipo battery combo. This helicopter features a beautiful factory painted
Red fiberglass canopy with an easy clip on/off
design for fast installation and removal.
The simple and light weight
design of this helicopter provides awesome flight performance just like larger helicopters
while still maintaining very stable hovering and flight. +/-14 degree
collective pitch is for extreme 3D performance. The clutch, fan and
bell assembly provides smooth operation even at high RPM's.
The forward mounted tail servo helps to keep exhaust
oil from entering servo, and also improves the helis CG. Pitch and all
servos moved forward for CG. The battery tray is designed for easy and
clean radio gear installation. With the 440cc fuel tank capacity, this
allows for about 10 minutes of 3D flying.
Heavy duty tail with thrust bearings, and 95mm tail
blades. The Torque Tube driven tail for incredible 50-size performance
and a rigid frame design that can also handle hard crashes without
damage. Super engine cooling system features a large diameter fan and
very efficient airflow to provide unequaled cooling and horsepower.
Clutch/Start shaft features a 10mm ID one way bearing to eliminate any
bearing problems during starting and flight. Ready to fly weight (no
fuel) is an incredibly light 3.20Kg (7lbs). The fuel tank is designed
so that no additional header tank is required.
Features:
- Main Gear Radio 8.5:1, 1500-2200 Rotor RPM
- Carbon Fiber frames, fins and boom supports
- +/-14° collective pitch is possible for extreme 3D performance
- Pitch and All servos moved forward for CG
- Battery tray designed for easy and clean radio gear installation
- 95mm Tail Blades
- Torque Tube driven tail for incredible 50 sized performance
- Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs)
- New main gear with one-way bearing design for high torque
- New flybar paddles feature light weight and sports
- New flybar control set design
- New tail boom supports
Specifications:
- Length: 1160mm
- Height: 410mm
- Main blade length: 600mm
- Main rotor diameter: 1350mm
- Tail rotor: 240mm
- Engine pinion gear: 20T
- Main drive gear ratio: 8.1:1:4.5 (E:M:T)
- Autorotation tail drive gear: 180T
- Tail drive gear: 40T
- Flying Weight: Approx 3200g
Included Accessories:
- T-REX 600 Nitro Pro Kit
- Align .50 Engine and muffler
- 2 in 1 Regulator (Rx and glow plug power)
- 7.4V 1900mAh LiPo for regulator
- Painted Fiberglass canopy
- Fuel Tube
- Fuel filter
- New fuel tube clips
- New landing skid
Additional items needed to complete this kit:
|
