 This is an optional Synergy Torque Tube Conversion Kit, and is intended for use with the Synergy E6/7 helicopter.
NOTE: It is highly recommended that you read the entire manual prior to assembly. Get the manual here.
Includes:
- (1) CF Vertical Fin – TT E7 1pce (yes, this conversion requires a new CF vertical fin)
- (1) 18T Front Trans Bevel Gear (machined delrin gear)
- (1) 18T Front Trans Mushroom Gear (machined delrin gear)
- (1) 20T Bevel Gear – E7 (machined delrin gear)
- (1) 20T Bevel Mushroom Gear – E7 (machined delrin gear)
- (1) 12T Spur Gear (CNC hard coat aluminum gear)
- (1) 54T Spur Gear (machined delrin gear)
- (6) TranSupport Standoff
- (1) Front Mushroom Gear Bearing Block
- (1) Bevel Gear Top Bearing Block
- (1) Spur Gear Bottom Bearing Block
- (1) Tail Box
- (1) Tail Box Plate Left
- (1) Tail Box Plate Right
- (1) Tail Box Plate Spacer
- (1) Output Shaft Spacer
- (1) Tail Box Bearing Spacer
- (2) 2mm Bevel Gear Pin
- (1) 2mm Spur Gear Pin
- (1) Spur Gear Shaft
- (1) 6mm Tail Output Shaft (included for those who run bent tail output shafts and dont know it)
- (1) 6mm Shim
- (1) Tail Bell Crank Mount
- (1) Spur Gear Hub (this is a very nice cnc hub to support the 54T Spur Gear)
- (1) Jesus Bolt Collar
- (1) Torque Tube E7
- (1) Torque Tube E6 (yes, you get a TT for your E6 if this is the way you decided to build the kit)
- (2) Torque Tube End
- (2) Torque Tube Bearing Housing
- (4) O-Ring
- (2) 6x13x5 Radial Bearing
- (2) 8x14x4 Radial Bearing
- (4) 12x18x4 Radial Bearing
- (3) 5x9x3 Radial Bearing
- (1) 5x10x4 Radial Bearing
- (1) M3x6 Set Screw
- (3) M3x12 Set Screw
- (2) M2x10 Socket Head
- (4) M3x6 Type 1 Cross Recess
- (27) M3x6 Button Head
- (6) M3x8 Button Head
- (3) M3x10 Button Head
- (1) M3x30 Socket Head
- (1) M3x8 Socket Head
- (2) M2 Regular Nut
- (1) M3 Nylock Nut
- (1) M3 Washer
|
