 This is the Align APS Gyro. The APS Gyro is an electronic flight augmentation device, and is ONLY compatible with the Align 3GX flybarless system. The APS gyro gives your helicopter the ability to self stabilize, hold position and altitude, as well as autonomous way point and return home flights. This is the perfect tool for flight training and aerial photography applications.
Functions of Align APS Gyro:
- Semi-autonomous take off / Landing.
- Point to point automatic flights.
- Emergency bailout stabilization.
- Failsafe: Automatic return home during loss of signal situation.
- Simple logical setting through transmitter.
- Supports software upgrades.
Features:
- Built in 3-axis accelerometer, 3-axis magnetic compass, altimeter, and GPS sensor to work with DSP processor to enable APS to have precise detection and control abilities.
- Use with Align's 3GX flybarless system for ease of install and simplified setup, APS is functional with a few setup steps.
- Multi flight mode and multi navigate functions, with a variety of modes and functions.
- Failsafe function, When the helicopter looses signal, APS will take over and fly the helicopter back to where the helicopter regains the signal.
- Automatic helicopter stabilize function. When helicopter's attitude is not stable, switch to APS Mode will enable APS to immediately stabilize helicopter and provide help for beginners.
- Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
- Supports software upgrades.
Specifications:
Suitable Voltage Range: DC 3.5~8.4V
Operating current consumption: <200mA @4.8V
Operating temperature: -20℃~65℃
Operating humidity: 0%~95%
RoHS certified: Yes
Hovering Precision (Depending on satellite status): Horizontal ±1m, Vertical ±1m
APS Cotrol unit Dimension: 35.4x27.9x17mm
APS Cotrol unit Weight: 14.8g
APS Sensor Dimension: 29.5x26.3x10.8mm
APS Sensor Weight: 12.7g
Includes:
- (1) APS Control Unit
- (1) APS Sensor
- (6) APS gyro anti-vibration foam (34x9x3mm)
- (1) APS sensor mount (34.5x30x6mm)
- (1) APS sensor mounting platform tailboom clamp (550-700)
- (1) APS sensor mounting platform tailboom clamp (500)
- (1) APS sensor mounting platform tailboom clamp (450)
- (1) APS controller vibration dampening metal plate (35.4x27.9x3mm)
- (1) Signal Y-adapter
- (1) APS Signal wire (350mm)
- (1) GPS Signal wire (160mm)
- (2) Self tapping screw (T2x10mm)
- (2) Self tapping screw (T2.6x10mm)
- (2) Self tapping screw (T3x12mm)
- (1) Gyro foam (3M 24x24x2mm)
- (1) Plastic flat screwdriver (3x7x40mm)
|
