Trinity ExTech "II" Pre-Run "Tuned" .24 Competition Truggy Engine (Turbo Plug) [TRI40103]

Trinity ExTech "II" Pre-Run "Tuned" .24 Competition Truggy Engine (Turbo Plug)
[TRI40103]

Low Price: $279.99

$Trinity ExTech \"II\" Pre-Run \"Tuned\" .24 Competition Truggy Engine (Turbo Plug)$

This item earns up to 280
Customer Rewards Points!

In Stock!

Free Shipping Eligible!
(See Details)

The ExTech "II" .24 engine will give Truggy Racers that extra power they desire, that a .21 size engines can't offer . In the past the .28 size engines were the only option to get this extra power. And with fuel efficiency being a big part of the pit strategy at today's events the .28 size engines are rarely seen at full competition racing. That's where the ExTech "II" .24 engine stands out. Not only is the power equal to some .28 engines, but the ExTech "II" .24 will get the run time of a typical Race .21 size engine.

It's the design of the Extech "II" .24 that makes this engine the power house that it is. The square Bore and Stroke (17.17mm) and Long Rod (29.997mm) design gives the engine a better balance, which increases power and efficiency throughout the power curve. Not only does the .24 have the bottom-end power of a typical Race .28, but has the upper rpm power to keep pulling you down the longest straight you may encounter.

Until now most .28's or .25's size engines have used the .21 size engine stroke with a punched out bore. And typically use the short rod (29.48mm) of the 21 engine. That's not the case on the ExTech "II" .24 Truggy Engine. The Bore / Stroke have been increased and squared to give better performance throughout the entire power curve. Offering the best power and fuel efficiency from any race engine out there!

All engines will be broken in, carb flow checked and dyno tuned. A dyno spec sheet will come with each motor.

"Tuned" version features:

Matched piston and sleeve.
Flow tested carburetor.
Blueprinted.
Broken in.
Tuned Dyno tested.
Dyno printout with 2 pipe options.
Specifications:
.24 displacement, Bigger bore, super square.
The first dedicated truggy engine, not a re-badged .21 or monster truck engine.
More speed and power than .28's etc.
Better fuel mileage than other truggy engines.
5 port plus 2 by-pass on sleeve.

Specifications
Displacement: .24c.i. / 3.975cc
Bore: .676 inch / 17.17mm
Stroke: .676 inch / 17.17mm
Porting intake: 5 port
Porting exhaust: Single Optimized
Crankshaft: 14.2mm
Rear Bearing: Ceramic
Carburetor: Composite / Two Needle / Adjustable Venturi
Glow Plug: ExTech T5 or T6
Usable RPM Range: 40,000rpm
Weight: N/A

Current Reviews: 12

This product was added to our catalog on Friday, September 26, 2008.

Quantity:

Customers who bought this product also purchased

A Main Hobbies Athletic Gray "Splash" T-Shirt (Medium)	XRAY Active Differential Outdrive Adapter (2) (XB808)	A Main Hobbies Athletic Gray "Splash" T-Shirt (Large)
XRAY Clutch Springs Hard (3)	Power Save Racing After Run Oil with Special SNAP Stopper (90ml)	Lucky 7 Air Seal Engine Sealant
Team Losi RE11 1/8 Race Tuned Pipe Exhaust System (T-2050)	Trinity ExTech TT2 .24 Truggy Tuned Pipe w/Manifold	O.S. P4 Turbo Glow Plug "Super Hot"