|
This is the Nitro Telemetry System Combo Pack from Spektrum. It’s a tool that no serious racer will want to do without – a tool that gives you the kind of information that helps you tweak your car for maximum performance! And it's all packaged in one convenient box. If you’re a serious racer, you’re probably way ahead of us in figuring out Spektrum Telemetry’s benefits. But we’ll list them nonetheless. There are benefits like engine-saving feedback to help maximize performance while preventing costly failures and rebuilds. And the elimination of dumped RX packs means no more crashes or DNF’s due to battery failure in nitro-powered vehicles. Besides that, Spektrum Telemetry’s lap timing helps you analyze the effectiveness of tire and gear selections, suspension tweaks, etc. Plus it backs up race organizers’ lap counting systems. Add its RPM sensing to give you a handle on your car’s actual speed, plus the Quality of Signal feature to monitor RF link strength, and you’ve got the whole package!
For more information on the Spektrum Telemetry system, read this article on the Spektrum web site.
NOTE: The Spektrum Telemetry system is only compatible with the Spektrum radio systems. It will not work with a regular radio unless you have a Spektrum DSM module installed.
NOTE: In order to use the lap timing features of this telemetry system, you need to purchase the optional lap timing trigger (SPM1330).
Key Features:
- Monitors Temperature to maximize performance and eliminate costly re-builds
- Battery voltage display prevents runaway crashes in nitro cars
- RPM display shows top-end speed
- Quality of signal monitors RF link strength
- Lap Counter/Timer helps analyze results of performance tweaks
Detailed Information:
- SPM1320: Handheld Unit, 2.75" x 2.60" x 1.25", 3.6oz (with battery)
- SPM1325: On-Board Module, 1.08" x .725" x .48", 0.1oz
- SPM1450: Head Temparature Sensor, 8.25" wire length, -35º to 575º F temperature range
- SPM1452: RPM Sensor, 6.3" wire length, Infrared 0-50,000 rpm sensor
- SPM1453: Lap Counter/Timer Sensor, 6.3" wire length, Infrared sensor, 0-99 laps/.01 sec. increments
- SPM1501: Sensor Mount Hardware: .21-.26, 2.36" x .32" x 1.25", 0.1oz
- SPM1510: Battery Voltage Lead: 5.8" wire length
|
