Tekno RC M6 Driveshaft & Hub Carrier Set

Read Reviews
Write a Review
Tekno RC M6 Driveshaft & Hub Carrier Set
Back Order Now
You may back order this item and it will ship when it arrives.
$2.99 flat rate shipping! Learn More
Price: $53.99

Please Log in to receive a notification when this item arrives in stock.

Save In List
This item earns up to 54 VIP Reward Points Learn More
This is the optional Tekno RC M6 Driveshaft & Hub Carrier Set, and is intended for use with the Traxxas Slash, Nitro Rustler and Nitro Stampede. The Tekno RC M6 Driveshafts and Rear Hubs will provide you with the the ultimate in performance and durability for your Slash, Nitro Rustler, or Nitro Stampede.

Features:
  • Custom 6mm stub axles - no more bending or breaking
  • No Telescoping = NO BINDING
  • Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
  • Hardened steel drive shafts and drive cups
  • Captured CV drive pin - it can't fall out.
  • New M6 rear hub design with multiple camber link locations
  • Includes two sets of rear hubs (0.5  and 1.5 degrees).  1, 2, 3, and 4 degree settings available.
  • Reduces slop
  • Stock wheels and nuts fit with no mods
  • Metric hardware throughout 

This product was added to our catalog on September 8, 2010

Vintage Racer
Verified Owner
Sunday, Sep 11 2016 (about 7 years ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
I saw this kit looking thru forums and also on the Tekno Rc webstie and wanted to try to upgrade the rigidity of my 2 Pro-line Kits (PRO-MT and Pro2 SC buggy)when I saw some good reviews I made my decisions and order this kit paired with the longer bones (TKR2210) to be compatible with the wider stance of the pro-line protrac suspension. And just wow.. The bigger bearings in the hub carriers ,the bigger axles and the added Toe-in of the hubs made both vehicle more stable in the straights and punching after a turn.. I also purchase the Aluminum HEX Clamped adapters (TKR1654X) to go with this kit.. Yes it's an expansive upgrade to say the least but Wow , now I don't break rear axles in my Pro-MT anymore .. Thanks Amain

PS: Be careful that with the Pro-line F11 protrac wheels you will need to put a (0.5mm)shim between the HEX and your Wheel.The Hex is to deep and part of the M6 axle goes thru the pro-line F11 Wheels and this causes a gap between your wheel and your serrated nut..
Jim Frazier
Friday, May 7 2021 (about 2 years ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
This didnt work on my slash 2wd setup with rpm arms the dogbones bottom out on the drive cups before the shocks collapse. I contacted tekno and they told me they will not work on anything but factory arms. Ok first off who the hell doesnt step up to rpm arms after stock arms break so the way it stood I was out $45 so in order to make them work I had to take 1mm off each side of the diff, countersink the inside of the tekno hubs and .5mm off the end of the dogbones and round the edges with 12mm bump stops on the shocks so now the chassis slaps the ground when the suspension collapses. Had tekno made dogbones 2mm shorter and the drive cups 2mm longer this would have solved everything…. bad r&d on their part. Time will tell if it was a waste of time and money
Alberto
Tuesday, Jan 10 2023 (about a year ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
Does not fit on a Nitro Stampede or Nitro Rustler. Driveshafts are way too long and hit the inside of the drive cup which don't allow full suspension travel.
Darock Krueger
Monday, Aug 1 2022 (about a year ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
First thing I noticed was an absurd amount of slop in the rear end after installing all 4 corners. Both sides had holes too large for the pin that connects the rear hub carrier to the lower control arm. Decided I'd see how they worked as a whole, anyway. I got a few batteries through before they started breaking. I do bash kinda hard, but it seems like if a factory style one would have broken, so would have the tekno. Unreasonably fragile for the price paid. They call them hardened, but they'll bend without breaking? The nylon carriers seem weaker than factory, to boot. Never broke a factory one, but have broken two of these now. Not sure how folks have been happy with them. Think I'll be looking for a different driveshaft solution, as I'll go broke if these continue to break on a regular interval.
Jacob Parker
Wednesday, Jun 23 2021 (about 2 years ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
Don't know what that 1-Star review is talking about, these are great. Less expensive than the MIP kit, an ACTUAL CVD (not a just a metal version of the stock crap, like the MIP are), lighter, less parts for less to break, and stronger. I've run these in all my Slashes from a ROAR-Spec 2S 4x4 Ultimate to an Open Class 6S Drag Car and even a 4S 1/8 Buggy Converted 4x4 Ultimate. Never had an issue.
Chris Hakomaki
Saturday, May 1 2021 (about 2 years ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
These axles suck. My suspension would not collapse with these axles in. I thought maybe I order the wrong ones. So I went down to the hobby store and told them I have a 2WD TRAXXAS SLASH. They gave me the same ones I ordered. I sill bought them and tried them out. Same problem my suspension would not travel. If you do not want any travel in you suspension then these will work for you. I am going to order the MIP axles (MIP08106) and I am going to try them out. With my Castle Creations Mamba X ESC and motor I just go through the stock plastic axles in like 2 batteries. I do not recommend these if you like to have travel in your suspension. If you don't care about your travel in your suspension then rock them.
Derrick G
Saturday, Jun 8 2019 (about 4 years ago)
Tekno RC M6 Driveshaft & Hub Carrier Set
Will these work on the 2wd Slash as well?? Looking for a set for my 2wd as i have the m6 axles in my 4x4 slash which are badass