This is a set of RPM Rear A-Arms, and are intended for use with the
Associated SC10 and T4 1/10 scale trucks. RPM SC10/T4 A-arms were
designed to solve critical durability issues stemming from stock rear
A-arms. These SC10/T4 rear A-arms are designed to withstand some
serious abuse!
RPM A-arms are over 25% thicker around the hinge pins than the stock
versions which translates into pure RPM muscle to help eliminate damage
during those “Wow, did you see THAT crash!” moments. Other design
improvements include angled leading and trailing edges of the A-arms,
which help the A-arms transition up and over objects much better than
the blunt surfaces of the stockers.
RPM also focused on the hinge pin retaining system used on the stock
A-arms. Using a small screw hole so close to the hinge pin like the
stock arms does weaken the A-arms. RPM moved the hinge pin retaining
screws in-line with the hinge pins, significantly strengthening the
A-arms in the process. By eliminating the smaller 2-56 hinge pin
retaining screws, RPM also eliminated the problem of the hinge pins
falling out due to varying screw head diameters.
The final focus was on slop elimination. RPM's strict quality control
allows them to tighten up all of their tolerances without fear of
binding the suspension system. The final result is a smooth, free
moving suspension system with minimal slop. The tighter tolerances on
these A-arms allows other critical adjustments such as camber and toe
angles to be much more consistent, providing better and more consistent
control of the SC10 or T4.
RPM SC10/T4 A-arms come with all necessary mounting hardware and
instructions, are sold in pairs and are backed by RPM's
industry-leading breakage warranty. Combine a set of RPM rear A-arms
with a set of RPM front arms and if you crash, you’ll still finish your race, not your day!
|
