Vanquish Products Brass Knuckle Weights (2)
[VPS02800]

This item earns up to 78 Customer Rewards Points! With your purchase, receive at no cost: In Stock! Free Shipping Eligible! (See Details) Wish List! Buy Now!

This is a set of two Vanquish Products Brass Knuckle Weights, and are intended for use with the Axial XR-10.

Features:

• Specifically designed to work with Vanquish Products Wheels and XR-10 knuckles.
• Use with Knuckle Weight Add On Rings to add additional weight
  
• Made from Solid 1 5/8 brass rod.
• Outer diameter is 1.600 Inches.
• Precision cnc machined.
• Weighs in at 3.25 OZ or 92 grams.
• Easy to install, rear mount with 4 screws.
• Allows full 50 degree steering in both directions and clearance for steering link.
• Precision fit with Vanquish Products XR-10 knuckle. leaves no room to move under impact.
• Installation does not cause bearing distortion or bend VP XR-10 knuckle.
• Knuckle weights fit all Vanquish Products 2.2 Wheels. depending on hub you may be limited on the number of rings you can run, See below for a complete list.
• Use some Brasso brass polish for long lasting shine.
• Use low strength locktite to ensure mounting screw do not come loose over time, do not over tighten screws, they only need to be snug.

• SLW Wheel:
• 225 hubs can add 2ea. 1/8 rings = 4.74 oz. (114g)
• 350 hubs can add 3ea. 1/8 rings = 5.45 oz. (154g)
• 475 hubs can add 4ea. 1/8 rings = 6.17 oz. (175g)
• 600 hubs can add 5ea. 1/8 rings = 6.87 oz. (195g)
• 725 hubs can add 6ea. 1/8 rings = 7.59 oz. (215g)
• DH ProComp Wheel:
• 335 hubs can not add rings
• 460 hubs can add 1ea. 1/8 rings = 4.04 oz. (114g)
• 585 hubs can add 2ea. 1/8 rings = 4.74 oz. (134g)
• 710 hubs can add 3ea. 1/8 rings = 5.45 oz. (154g)
• 835 hubs can add 4ea. 1/8 rings = 6.17 oz. (175g)
• DH ProComp II Wheel:
• 335 Does not fit.
• 460 Does not Fit.
• 585 Does Fit. But no extra rings.
• 710 hubs can add 1ea. 1/8 rings = 4.04 oz. (114g)
• 835 hubs can add 2ea. 1/8 rings = 4.74 oz. (134g)