 This is the KO Propo VFS-1 Brushless Motor Controller Version 1.5. Version 1.5 of the BMC has proved itself at the ROAR Carpet Nationals with 3 TQ positions and 2 wins in it's first outting. The VFS-1 Brushless Motor Controller (BMC) uses KO PROPO's patented VFS technology for sensored brushless motors. Featuring five new preset programs and now you can adjust the drag brake through the setup switch in 10% increments (OFF-50%). Equipped with overheat and current overload protection, this brushless speed control can handle motors as low as 4.5T (with heat sink and fan installed, 2.5T). The VFS technology allows you to program and fine tune your drive frequency, brake frequency, drag brake and battery selection. All specs are the same as the original 1.0 version, but you will also be able to to take advantage of the Stock Motor Manager for increased timing once available.
Features:
- Five preset programs
- Overheat & Current Overload protection equipped
- VFS technology allows you to program and fine tune:
- Programmable Drive frequencies (2KHz~12.0KHz) for 32 throttle steps for more control/efficiency
- Programmable Brake Frequency (500Hz~2.5kHz) 64 settings
- Programmable Drag Brake in 10% increments (OFF-50%)
- Programmable battery settings [NiMh (4C), NiMh (5,6C), LiPo]
Specifications:
Motor Limit: 4.5T (with heat sink and fan installed, 2.5T)
Size: 33.4x37.0x16.8mm
Weight: 30.8g
Max Peak Current: 3120A (FET Specifications)
Max Continuous Current: 780A (FET Specifications)
|
